[Allstar Digital] DMRGateway Steering one way audio
Corey Dean
n3fe at repeater.net
Fri May 13 12:11:31 EDT 2016
Could that also be a repeater id instead of a user id?
Sent from my iPhone
> On May 13, 2016, at 11:09 AM, Steve Zingman <szingman at msgstor.com> wrote:
>
> No,
> All analog traffic through the gateway will look like it's coming from you. ASL ---> DMR
>
>> On 5/13/2016 11:08 AM, Robert Newberry wrote:
>> OK Steve, thank you. This will be an excellent addition to my network. Is there problem with me using 3123001 for gatewayDmrId?
>>
>> On Fri, May 13, 2016 at 10:57 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>> You might want to change LOG_LEVEL to INFO or WARNING to get some information into the log. at least when debugging.
>>>
>>>> On 5/13/2016 10:49 AM, Robert Newberry wrote:
>>>> [LOGGER]
>>>> LOG_FILE: /var/log/dmrlink/ambe_audio.log
>>>> LOG_HANDLERS: file
>>>> LOG_LEVEL: CRITICAL
>>>> LOG_NAME: DMRlink
>>>>
>>>> I put 3123001 unber ambe_audio.cfg
>>>>
>>>>
>>>> [ME_SW]
>>>> gatewayDmrId = 3123001
>>>> tgFilter = 3123
>>>> txTg = 3123
>>>> txTs = 2
>>>>
>>>> On Fri, May 13, 2016 at 10:43 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>>>> Show me the [LOGGER] section in /opt/dmrlink/ambe_audio/dmrlink.cfg
>>>>> Where did you put 3123001?
>>>>>
>>>>>
>>>>>> On 5/13/2016 10:39 AM, Robert Newberry wrote:
>>>>>> Steve, I got it working. I ended up using my ID 3123001. I just got done testing on BM and talking to someone on K0USY. On the last heard it shows up as me (N1XBM) and the source my repeater.
>>>>>>
>>>>>> I checked /var/log/dmrlink/ambe_audio.log and its blank?
>>>>>>
>>>>>> On Fri, May 13, 2016 at 9:20 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>>>>>> Post /var/log/dmrlink/ambe_audio.log after you issue the section command
>>>>>>>
>>>>>>> On 5/13/2016 9:12 AM, Robert Newberry wrote:
>>>>>>>>
>>>>>>>> So I had a look at things. All files refernced are in /opt/dmrlink/ambe_audio
>>>>>>>>
>>>>>>>> So in dmrlink.cfg I have
>>>>>>>> [AMBE_PEER]
>>>>>>>> ENABLED: True
>>>>>>>> RADIO_ID: 312107
>>>>>>>> IP: 192.168.0.203
>>>>>>>> PORT: 52345
>>>>>>>> ALIVE_TIMER: 5
>>>>>>>> MAX_MISSED: 20
>>>>>>>> PEER_OPER: True
>>>>>>>> IPSC_MODE: DIGITAL
>>>>>>>> TS1_LINK: True
>>>>>>>> TS2_LINK: True
>>>>>>>> CSBK_CALL: False
>>>>>>>> RCM: True
>>>>>>>> CON_APP: True
>>>>>>>> XNL_CALL: False
>>>>>>>> XNL_MASTER: False
>>>>>>>> DATA_CALL: True
>>>>>>>> VOICE_CALL: True
>>>>>>>> MASTER_PEER: False
>>>>>>>> AUTH_ENABLED: True
>>>>>>>> AUTH_KEY: A1B2C3
>>>>>>>> MASTER_IP: 192.168.0.203
>>>>>>>> MASTER_PORT: 50001
>>>>>>>>
>>>>>>>> I have in ambe_audio.cfg
>>>>>>>> # DEFAULTS - General settings. These values are
>>>>>>>> #inherited in each subsequent section (defined by section value).
>>>>>>>> [DEFAULTS]
>>>>>>>> debug = False # Debug output for each VOICE frame
>>>>>>>> outToFile = False # Write each AMBE frame to a file called ambe.bin
>>>>>>>> outToUDP = True # Send each AMBE frame to the _sock object (turn on/off DMRGateway operation)
>>>>>>>> gateway = 127.0.0.1 # IP address of DMRGateway app
>>>>>>>> toGatewayPort = 31000 # Port DMRGateway is listening on for AMBE frames to decode
>>>>>>>> remoteControlPort = 31002 # Port that ambe_audio is listening on for remote control commands
>>>>>>>> fromGatewayPort = 31003 # Port to listen on for AMBE frames to transmit to all peers
>>>>>>>> gatewayDmrId = 312307 # id to use when transmitting from the gateway
>>>>>>>> tgFilter = 42657 # A list of TG IDs to monitor. All TGs will be passed to DMRGateway
>>>>>>>> txTg = 42657 # TG to use for all frames received from DMRGateway -> IPSC
>>>>>>>> txTs = 2 # Slot to use for frames received from DMRGateway -> IPSC
>>>>>>>> #
>>>>>>>> # The section setting defines the current section to use. By default, the ‘ENABLED’ section in dmrlink.cfg is used.
>>>>>>>> # Any values in the named section override the values from the DEFAULTS section. For example, if the BM section
>>>>>>>> # has a value for gatewayDmrId it would override the value above. Only one section should be set here. Think
>>>>>>>> # of this as an easy way to switch between several different configurations with a single line.
>>>>>>>> #
>>>>>>>> #section = BM # Use BM section values
>>>>>>>> #section = Sandbox # Use SANDBOX section values
>>>>>>>>
>>>>>>>> [AMBE_PEER]
>>>>>>>> gatewayDmrId = 312307
>>>>>>>> tgFilter = 42657
>>>>>>>> txTg = 42657
>>>>>>>> txTs = 2
>>>>>>>>
>>>>>>>> [ME_SW] # BrandMeister
>>>>>>>> tgFilter = 3123 # A list of TG IDs to monitor. All TGs will be passed to DMRGateway
>>>>>>>> txTg = 3123 # TG to use for all frames received from DMRGateway -> IPSC
>>>>>>>> txTs = 2 # Slot to use for frames received from DMRGateway -> IPSC
>>>>>>>>
>>>>>>>> So AMBE_PEER works fine, I attempted to add ME_SW which only works one way. The way I tested this is by using my dv4mini on 3123 attempting to talk to my repeater. Audio passed from my dv4mini to my repeater, but my repeater (from ASL) will not pass audio to the dv4mini. Also my bridge is setup for 3123 and my local users on the repeater can use 3123 for QSOs.
>>>>>>>>
>>>>>>>> I'm guessing part of my problem is I need to add ME_SW to dmrlink.cfg. Although I'm confused about some of the settings such as using duplicate information, such as ports and IDs.
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Allstar-Digital mailing list
>>>>>>>> Allstar-Digital at lists.keekles.org
>>>>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>>>
>>>>>>> --
>>>>>>> "Anything is possible if you don't know what you are talking about."
>>>>>>> 1st Law of Logic
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Allstar-Digital mailing list
>>>>>>> Allstar-Digital at lists.keekles.org
>>>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> N1XBM
>>>>>> Apparare Scientor
>>>>>> Paratus Communicare
>>>>>> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>>>>> www.radioguysrepeaternetwork.com
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Allstar-Digital mailing list
>>>>>> Allstar-Digital at lists.keekles.org
>>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>> --
>>>>> "Anything is possible if you don't know what you are talking about."
>>>>> 1st Law of Logic
>>>>>
>>>>> _______________________________________________
>>>>> Allstar-Digital mailing list
>>>>> Allstar-Digital at lists.keekles.org
>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>
>>>>
>>>> --
>>>> N1XBM
>>>> Apparare Scientor
>>>> Paratus Communicare
>>>> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>>> www.radioguysrepeaternetwork.com
>>>>
>>>>
>>>> _______________________________________________
>>>> Allstar-Digital mailing list
>>>> Allstar-Digital at lists.keekles.org
>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>> --
>>> "Anything is possible if you don't know what you are talking about."
>>> 1st Law of Logic
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>>
>> --
>> N1XBM
>> Apparare Scientor
>> Paratus Communicare
>> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>> www.radioguysrepeaternetwork.com
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160513/10693539/attachment.html>
More information about the Allstar-Digital
mailing list