[Allstar Digital] DMRGateway Steering one way audio

Steve Zingman szingman at msgstor.com
Fri May 13 13:17:09 EDT 2016


As any developer will tell you. There is nothing like a user to try 
things we would never think of. ;) Just a reminder, set your hangtime 
and althangtime to 0. Do not just comment it out. Oh, and you can 
monitor more then 1 TG at a time.

73, Steve N4IRS

On 5/13/2016 1:12 PM, Robert Newberry wrote:
>
> Steve and group l,
>
> I'm glad that I can assist in uncovering this information. I noticed 
> on last heard it would show up blank, although no audio would be 
> heard. That is when I suspected it was a ID conflict and I changed it 
> to my personal ID. I suppose I could apply for another repeater ID?
>
> Also this steering feature is great, works perfectly, and the audio is 
> excellent. This will allow me to leverage cron, and I setup a section 
> to monitor all TGs on my repeater from home. I only have two portable 
> dmr radios, I still need to buy some mobiles.
>
> Thank you!
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>
>
> On May 13, 2016 12:35 PM, "Steve Zingman" <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     See my posting to Robert. No it can not, at least as far as BM is
>     concerned. I bet it could be a repeater ID, just not the same one.
>
>     On 5/13/2016 12:11 PM, Corey Dean wrote:
>>     Could that also be a repeater id  instead of a user id?
>>
>>     Sent from my iPhone
>>
>>     On May 13, 2016, at 11:09 AM, Steve Zingman <szingman at msgstor.com
>>     <mailto:szingman at msgstor.com>> wrote:
>>
>>>     No,
>>>     All analog traffic through the gateway will look like it's
>>>     coming from you. ASL ---> DMR
>>>
>>>     On 5/13/2016 11:08 AM, Robert Newberry wrote:
>>>>     OK Steve, thank you. This will be an excellent addition to my
>>>>     network. Is there problem with me using 3123001 for gatewayDmrId?
>>>>
>>>>     On Fri, May 13, 2016 at 10:57 AM, Steve Zingman
>>>>     <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>>>
>>>>         You might want to change LOG_LEVEL to  INFO or WARNING to
>>>>         get some information into the log. at least when debugging.
>>>>
>>>>         On 5/13/2016 10:49 AM, Robert Newberry wrote:
>>>>>         [LOGGER]
>>>>>         LOG_FILE: /var/log/dmrlink/ambe_audio.log
>>>>>         LOG_HANDLERS: file
>>>>>         LOG_LEVEL: CRITICAL
>>>>>         LOG_NAME: DMRlink
>>>>>
>>>>>         I put 3123001 unber ambe_audio.cfg
>>>>>
>>>>>
>>>>>         [ME_SW]
>>>>>         gatewayDmrId = 3123001
>>>>>         tgFilter = 3123
>>>>>         txTg = 3123
>>>>>         txTs = 2
>>>>>
>>>>>         On Fri, May 13, 2016 at 10:43 AM, Steve Zingman
>>>>>         <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>>>>
>>>>>             Show me the [LOGGER] section in
>>>>>             /opt/dmrlink/ambe_audio/dmrlink.cfg
>>>>>             Where did you put 3123001?
>>>>>
>>>>>
>>>>>             On 5/13/2016 10:39 AM, Robert Newberry wrote:
>>>>>>             Steve, I got it working. I ended up using my ID
>>>>>>             3123001. I just got done testing on BM and talking to
>>>>>>             someone on K0USY. On the last heard it shows up as me
>>>>>>             (N1XBM) and the source my repeater.
>>>>>>
>>>>>>             I checked /var/log/dmrlink/ambe_audio.log and its blank?
>>>>>>
>>>>>>             On Fri, May 13, 2016 at 9:20 AM, Steve Zingman
>>>>>>             <szingman at msgstor.com <mailto:szingman at msgstor.com>>
>>>>>>             wrote:
>>>>>>
>>>>>>                 Post /var/log/dmrlink/ambe_audio.log after you
>>>>>>                 issue the section command
>>>>>>
>>>>>>                 On 5/13/2016 9:12 AM, Robert Newberry wrote:
>>>>>>>
>>>>>>>                 So I had a look at things. All files refernced
>>>>>>>                 are in /opt/dmrlink/ambe_audio
>>>>>>>
>>>>>>>                 So in dmrlink.cfg I have
>>>>>>>                 [AMBE_PEER]
>>>>>>>                 ENABLED: True
>>>>>>>                 RADIO_ID: 312107
>>>>>>>                 IP: 192.168.0.203
>>>>>>>                 PORT: 52345
>>>>>>>                 ALIVE_TIMER: 5
>>>>>>>                 MAX_MISSED: 20
>>>>>>>                 PEER_OPER: True
>>>>>>>                 IPSC_MODE: DIGITAL
>>>>>>>                 TS1_LINK: True
>>>>>>>                 TS2_LINK: True
>>>>>>>                 CSBK_CALL: False
>>>>>>>                 RCM: True
>>>>>>>                 CON_APP: True
>>>>>>>                 XNL_CALL: False
>>>>>>>                 XNL_MASTER: False
>>>>>>>                 DATA_CALL: True
>>>>>>>                 VOICE_CALL: True
>>>>>>>                 MASTER_PEER: False
>>>>>>>                 AUTH_ENABLED: True
>>>>>>>                 AUTH_KEY: A1B2C3
>>>>>>>                 MASTER_IP: 192.168.0.203
>>>>>>>                 MASTER_PORT: 50001
>>>>>>>
>>>>>>>                 I have in ambe_audio.cfg
>>>>>>>                 # DEFAULTS - General settings. These values are
>>>>>>>                 #inherited in each subsequent section (defined
>>>>>>>                 by section value).
>>>>>>>                 [DEFAULTS]
>>>>>>>                 debug = False # Debug output for each VOICE frame
>>>>>>>                 outToFile = False # Write each AMBE frame to a
>>>>>>>                 file called ambe.bin
>>>>>>>                 outToUDP = True # Send each AMBE frame to the
>>>>>>>                 _sock object (turn on/off DMRGateway operation)
>>>>>>>                 gateway = 127.0.0.1 # IP address of DMRGateway app
>>>>>>>                 toGatewayPort = 31000 # Port DMRGateway is
>>>>>>>                 listening on for AMBE frames to decode
>>>>>>>                 remoteControlPort = 31002 # Port that ambe_audio
>>>>>>>                 is listening on for remote control commands
>>>>>>>                 fromGatewayPort = 31003 # Port to listen on for
>>>>>>>                 AMBE frames to transmit to all peers
>>>>>>>                 gatewayDmrId = 312307 # id to use when
>>>>>>>                 transmitting from the gateway
>>>>>>>                 tgFilter = 42657 # A list of TG IDs to monitor. 
>>>>>>>                 All TGs will be passed to DMRGateway
>>>>>>>                 txTg = 42657    # TG to use for all frames
>>>>>>>                 received from DMRGateway -> IPSC
>>>>>>>                 txTs = 2         # Slot to use for frames
>>>>>>>                 received from DMRGateway -> IPSC
>>>>>>>                 #
>>>>>>>                 # The section setting defines the current
>>>>>>>                 section to use.  By default, the ‘ENABLED’
>>>>>>>                 section in dmrlink.cfg is used.
>>>>>>>                 # Any values in the named section override the
>>>>>>>                 values from the DEFAULTS section.  For example,
>>>>>>>                 if the BM section
>>>>>>>                 # has a value for gatewayDmrId it would override
>>>>>>>                 the value above. Only one section should be set
>>>>>>>                 here. Think
>>>>>>>                 # of this as an easy way to switch between
>>>>>>>                 several different configurations with a single line.
>>>>>>>                 #
>>>>>>>                 #section = BM # Use BM section values
>>>>>>>                 #section = Sandbox # Use SANDBOX section values
>>>>>>>
>>>>>>>                 [AMBE_PEER]
>>>>>>>                 gatewayDmrId = 312307
>>>>>>>                 tgFilter = 42657
>>>>>>>                 txTg = 42657
>>>>>>>                 txTs = 2
>>>>>>>
>>>>>>>                 [ME_SW] # BrandMeister
>>>>>>>                 tgFilter = 3123 # A list of TG IDs to monitor. 
>>>>>>>                 All TGs will be passed to DMRGateway
>>>>>>>                 txTg = 3123 # TG to use for all frames received
>>>>>>>                 from DMRGateway -> IPSC
>>>>>>>                 txTs = 2 # Slot to use for frames received from
>>>>>>>                 DMRGateway -> IPSC
>>>>>>>
>>>>>>>                 So AMBE_PEER works fine, I attempted to add
>>>>>>>                 ME_SW which only works one way. The way I tested
>>>>>>>                 this is by using my dv4mini on 3123 attempting
>>>>>>>                 to talk to my repeater. Audio passed from my
>>>>>>>                 dv4mini to my repeater, but my repeater (from
>>>>>>>                 ASL) will not pass audio to the dv4mini. Also my
>>>>>>>                 bridge is setup for 3123 and my local users on
>>>>>>>                 the repeater can use 3123 for QSOs.
>>>>>>>
>>>>>>>                 I'm guessing part of my problem is I need to add
>>>>>>>                 ME_SW to dmrlink.cfg. Although I'm confused
>>>>>>>                 about some of the settings such as using
>>>>>>>                 duplicate information, such as ports and IDs.
>>>>>>>
>>>>>>>                 Thanks
>>>>>>>
>>>>>>>
>>>>>>>                 _______________________________________________
>>>>>>>                 Allstar-Digital mailing list
>>>>>>>                 Allstar-Digital at lists.keekles.org
>>>>>>>                 <mailto:Allstar-Digital at lists.keekles.org>
>>>>>>>                 http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>>
>>>>>>                 -- 
>>>>>>                 "Anything is possible if you don't know what you are talking about."
>>>>>>                 1st Law of Logic
>>>>>>
>>>>>>
>>>>>>                 _______________________________________________
>>>>>>                 Allstar-Digital mailing list
>>>>>>                 Allstar-Digital at lists.keekles.org
>>>>>>                 <mailto:Allstar-Digital at lists.keekles.org>
>>>>>>                 http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>             -- 
>>>>>>             N1XBM
>>>>>>             Apparare Scientor
>>>>>>             Paratus Communicare
>>>>>>             Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>>>>>             www.radioguysrepeaternetwork.com
>>>>>>             <http://www.radioguysrepeaternetwork.com>
>>>>>>
>>>>>>
>>>>>>             _______________________________________________
>>>>>>             Allstar-Digital mailing list
>>>>>>             Allstar-Digital at lists.keekles.org
>>>>>>             <mailto:Allstar-Digital at lists.keekles.org>
>>>>>>             http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>>             -- 
>>>>>             "Anything is possible if you don't know what you are talking about."
>>>>>             1st Law of Logic
>>>>>
>>>>>
>>>>>             _______________________________________________
>>>>>             Allstar-Digital mailing list
>>>>>             Allstar-Digital at lists.keekles.org
>>>>>             <mailto:Allstar-Digital at lists.keekles.org>
>>>>>             http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>         -- 
>>>>>         N1XBM
>>>>>         Apparare Scientor
>>>>>         Paratus Communicare
>>>>>         Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>>>>         www.radioguysrepeaternetwork.com
>>>>>         <http://www.radioguysrepeaternetwork.com>
>>>>>
>>>>>
>>>>>         _______________________________________________
>>>>>         Allstar-Digital mailing list
>>>>>         Allstar-Digital at lists.keekles.org
>>>>>         <mailto:Allstar-Digital at lists.keekles.org>
>>>>>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>         -- 
>>>>         "Anything is possible if you don't know what you are talking about."
>>>>         1st Law of Logic
>>>>
>>>>
>>>>         _______________________________________________
>>>>         Allstar-Digital mailing list
>>>>         Allstar-Digital at lists.keekles.org
>>>>         <mailto:Allstar-Digital at lists.keekles.org>
>>>>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>
>>>>
>>>>
>>>>     -- 
>>>>     N1XBM
>>>>     Apparare Scientor
>>>>     Paratus Communicare
>>>>     Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>>>     www.radioguysrepeaternetwork.com
>>>>     <http://www.radioguysrepeaternetwork.com>
>>>>
>>>>
>>>>     _______________________________________________
>>>>     Allstar-Digital mailing list
>>>>     Allstar-Digital at lists.keekles.org
>>>>     <mailto:Allstar-Digital at lists.keekles.org>
>>>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>     -- 
>>>     "Anything is possible if you don't know what you are talking about."
>>>     1st Law of Logic
>>>     _______________________________________________
>>>     Allstar-Digital mailing list
>>>     Allstar-Digital at lists.keekles.org
>>>     <mailto:Allstar-Digital at lists.keekles.org>
>>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>>     _______________________________________________
>>     Allstar-Digital mailing list
>>     Allstar-Digital at lists.keekles.org
>>     <mailto:Allstar-Digital at lists.keekles.org>
>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>     -- 
>     "Anything is possible if you don't know what you are talking about."
>     1st Law of Logic
>
>
>     _______________________________________________
>     Allstar-Digital mailing list
>     Allstar-Digital at lists.keekles.org
>     <mailto:Allstar-Digital at lists.keekles.org>
>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160513/8f973e77/attachment.html>


More information about the Allstar-Digital mailing list