[Allstar Digital] DMRGateway / DMRGui / DMRLink /ambe_audio / DV3000u/PiDV

[Guy Vachon VE2VAG]

Richard,

I was having the same problem as you, since I own a first generation ThumbDV which runs at 230400 bauds.
When I removed the –n argument in the command: python AMBEtest3.py -n -s /dev/ttyUSB0, it then worked for me.

So for people with first generation ThumbDV’s, the command python AMBEtest3.py -s /dev/ttyUSB0 must be used.

Also, on page 3, Steve says at point 8: DO NOT edit DMRGateway.ini UNLESS your DV is not at /dev/ttyUSB0
If you run a first gen ThumbDV, the baud rate must be changed in it also to 230400.

And for Steve:  thank you very much for all the efforts in the software and the documents.  I went thru it all, and except for the items mentionned up here, everything went well and I’m ready for the next steps.

Thanks and 73s from Guy VE2VAG  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170404/c1bacf1e/attachment.html>