[Allstar Digital] DMRGateway failure

[Steve Zingman]

OK, So,
2 Masters, 1 Peer.
Peer connected to BM?
Repeater1 connected to Master1?
Repeater2 connected to Master2?
"2 masters then each repeater is peered to one master." ????



On 4/5/2017 3:24 PM, Robert Newberry wrote:
> -No Actually 2 masters then each repeater is peered to one master. I 
> had to do this because of NAT hairpining. I then have the Masters 
> talking to each others to have both repeaters "linked"
>
> -Yes I am Peered to BM.
>
> - Yes my repeaters each have their own Masters withing DMRlink.
>
> -No AMBE_AUDIO is peered directly to BM.
>
> On Wed, Apr 5, 2017 at 3:13 PM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     I know you are running a bridge. Can I assume 1 Master and 1 Peer?
>     The Peer is connected to BM?
>     Your Repeaters connect to the Master?
>     The dmrlink / ambe_audio is connected to the Master?
>
>     On 4/5/2017 2:18 PM, Robert Newberry wrote:
>>     I've encountered a strange problem on my existing system that has
>>     been working for over a year without problem. I have not recently
>>     updated the software nor have I made any changes. The day I
>>     noticed it stopped working correctly I probably haven't even
>>     logged into it for weeks. I did all of the simple stuff like
>>     rebooting/ removing power to repeaters, routers, RPI's still
>>     hasn't fixed the problem.
>>
>>     Here is the problem.
>>
>>     -When I TX on my local DMR repeater it is heard on BM by my test
>>     subject on an open spot, but the audio is not being heard on Allstar
>>     -When I TX on Allstar it goes up to BM and is heard by my test
>>     subject on his open spot, but the audio does not repeat on  my
>>     local DMR repeater.
>>     -When my test subject TX's on his open spot I hear it on Allstar
>>     and DMR.
>>
>>     This never used to work this way, If I TX'd on my DMR repeater it
>>     was heard on Allstar, and in the opposite if I TX'd on Allstar it
>>     would be heard on my DMR repeater locally.
>>
>>     I hope that I formulated my question in a way that makes sense. I
>>     am unsure how to trouble shoot this because it appears that
>>     DMRGateway works in both directions...sort of.
>>
>>     Does anyone have any suggestions on how I should start
>>     troubleshooting this?
>>
>>
>>     -- 
>>     N1XBM
>>     Apparare Scientor
>>     Paratus Communicare
>>     Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>     www.radioguysrepeaternetwork.com
>>     <http://www.radioguysrepeaternetwork.com>
>>
>>
>>     _______________________________________________
>>     Allstar-Digital mailing list
>>     Allstar-Digital at lists.keekles.org
>>     <mailto:Allstar-Digital at lists.keekles.org>
>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>     <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital>
>     _______________________________________________ Allstar-Digital
>     mailing list Allstar-Digital at lists.keekles.org
>     <mailto:Allstar-Digital at lists.keekles.org>
>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>     <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> 
>
> -- 
> N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 
> 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com 
> <http://www.radioguysrepeaternetwork.com>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170405/8e9ed50c/attachment.html>