[Allstar Digital] DMRGateway failure

[Robert Newberry]

Steve,

I'm not sure it will help, but I made a picture in PDF and e-mailed it
direct to you.

On Wed, Apr 5, 2017 at 3:30 PM, Steve Zingman <szingman at msgstor.com> wrote:

> OK, So,
> 2 Masters, 1 Peer.
> Peer connected to BM?
> Repeater1 connected to Master1?
> Repeater2 connected to Master2?
> "2 masters then each repeater is peered to one master." ????
>
>
>
>
> On 4/5/2017 3:24 PM, Robert Newberry wrote:
>
> -No Actually 2 masters then each repeater is peered to one master. I had
> to do this because of NAT hairpining. I then have the Masters talking to
> each others to have both repeaters "linked"
>
> -Yes I am Peered to BM.
>
> - Yes my repeaters each have their own Masters withing DMRlink.
>
> -No AMBE_AUDIO is peered directly to BM.
>
> On Wed, Apr 5, 2017 at 3:13 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> I know you are running a bridge. Can I assume 1 Master and 1 Peer?
>> The Peer is connected to BM?
>> Your Repeaters connect to the Master?
>> The dmrlink / ambe_audio is connected to the Master?
>>
>> On 4/5/2017 2:18 PM, Robert Newberry wrote:
>>
>> I've encountered a strange problem on my existing system that has been
>> working for over a year without problem. I have not recently updated the
>> software nor have I made any changes. The day I noticed it stopped working
>> correctly I probably haven't even logged into it for weeks. I did all of
>> the simple stuff like rebooting/ removing power to repeaters, routers,
>> RPI's still hasn't fixed the problem.
>>
>> Here is the problem.
>>
>> -When I TX on my local DMR repeater it is heard on BM by my test subject
>> on an open spot, but the audio is not being heard on Allstar
>> -When I TX on Allstar it goes up to BM and is heard by my test subject on
>> his open spot, but the audio does not repeat on  my local DMR repeater.
>> -When my test subject TX's on his open spot I hear it on Allstar and DMR.
>>
>> This never used to work this way, If I TX'd on my DMR repeater it was
>> heard on Allstar, and in the opposite if I TX'd on Allstar it would be
>> heard on my DMR repeater locally.
>>
>> I hope that I formulated my question in a way that makes sense. I am
>> unsure how to trouble shoot this because it appears that DMRGateway works
>> in both directions...sort of.
>>
>> Does anyone have any suggestions on how I should start troubleshooting
>> this?
>>
>>
>> --
>> N1XBM
>> Apparare Scientor
>> Paratus Communicare
>> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>> www.radioguysrepeaternetwork.com
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>> _______________________________________________ Allstar-Digital mailing
>> list Allstar-Digital at lists.keekles.org http://lists.keekles.org/cgi-b
>> in/mailman/listinfo/allstar-digital
>
> --
> N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540,
> 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com
>
> _______________________________________________
> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>


-- 
N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
www.radioguysrepeaternetwork.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170405/2255a7aa/attachment.html>