[Allstar Digital] DMRGateway / DMRGui / DMRLink /ambe_audio / DV3000u/PiDV

Fri Apr 7 12:27:52 EDT 2017

Thanks very much Steve ! I'll play with all of this, and update dmrlink during the week end. Will keep posted on how it goes

Envoyé depuis mon téléphone intelligent Samsung Galaxy.
-------- Message d'origine --------De : Steve Zingman <szingman at msgstor.com> Date : 17-04-07  06:08  (GMT-05:00) À : Digital linking using Asterisk and app_rpt <allstar-digital at lists.keekles.org> Objet : Re: [Allstar Digital] DMRGateway / DMRGui / DMRLink /ambe_audio /
  DV3000u/PiDV 
Guy,
The problems we had with ambe_audio on the new version of dmrlink has 
been fixed. You can do a git pull and copy ambe_audio.py to 
/opt/dmrlink/ambe_audio.
I will be working on the configuration document next week. Really all 
that is left is pointing dmrlink.cfg at your master and configure 
ambe_audio.cfg.

As far as DMRGui, thats what I get for using tinyurl. Lesson learned. ;(
Here is a fresh link to DMRGui.zip 
<http://dvswitch.org/files/DMRGateway/DMRGui.zip>

73, Steve N4IRS

On 04/07/2017 05:23 AM, Guy Vachon VE2VAG wrote:
> Hello Steve,
>
> Sorry for the delay in answering, was overloaded with work.
> Dunno if you still needed the test, but anyhow, I've tried again the 
> command with and without the -n switch, and also 2 times back to back 
> with the -n switch (if I understood correctly the test you asked for)  
> and still the same results
>
> With the -n switch, the dongle never sends back the
>> 0AMBE3000R
>> Version
>> 6100010031
>> Wrote: 5 bytes
>> a11V120.E100.XXXX.C106.G514.R009.B0010411.C0020208
> we are expecting.  When the –n switch is removed from the the command, 
> I do receive it at the moment.
>
> When I was making tests, I’ve checked the dongle’s serial baud rate 
> with “stty -F /dev/ttyUSB0” and it stated at first that the dongle was 
> at 460800 bauds.
> I bought my ThumbDV when they came out at first, way before the new 
> model that is at 460800, so I knew mine was at 230400.
>
> Even if i tried sending the command python “AMBEtest3.py -n -s 
> /dev/ttyUSB0” after setting the serial baud rate baud rate at 230400 
> with  "stty -F /dev/ttyUSB0 230400", it would not work.
> Only way to ge the expected result was by removing the –n switch.
>
> Also, the AMBEtest3.py python command with the –n switch removed 
> always worked, even without trying setting the baud rate  of the 
> dongle at 230400 before that.
>
> BTW, I'm using the RC1 image from the links in your instructions. And 
> the above tests were made without doing any git pull that I was in the 
> posts made during the last couple of days.
>
> On my side, I went thru all the instructions from your document, and 
> I'm ready for the next part about the configuration.  But I know you, 
> Mike and the rest of the team are working hard with bug hunting, so 
> please keep up the good work and thanks for everything.
>
> Also, in regard of my initial question about DMRGui, it was because 
> the link for it in the files section of the DVhamswitch website sends 
> us on a parked domain for sale at vyous.com, so that link is dead.  
> Just in case you didn't know.
>
> 73's from Guy VE2VAG
> _______________________________________________
>
> Date: Wed, 5 Apr 2017 08:14:57 -0400
> From: Steve Zingman <szingman at msgstor.com>
> To: Digital linking using Asterisk and app_rpt
> <allstar-digital at lists.keekles.org>
> Subject: Re: [Allstar Digital] DMRGateway / DMRGui / 
> DMRLink/ambe_audio / DV3000u/PiDV
> Message-ID: <6cf8d6ee-9f4d-4d17-da7a-cc124ea90ea9 at msgstor.com>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
> Guy,
> I do not have the first generation ThumbDV. Could you try with the -n
> switch and when it fails, try with the -n switch? No reboot between 
> tests.
>
> Steve
>
> On 4/4/2017 9:18 PM, Guy Vachon VE2VAG wrote:
>> Richard,
>> I was having the same problem as you, since I own a first generation
>> ThumbDV which runs at 230400 bauds.
>> When I removed the –n argument in the command: *python AMBEtest3.py -n
>> -s /dev/ttyUSB0, *it then worked for me.
>> So for people with first generation ThumbDV’s, the command *python
>> AMBEtest3.py -s /dev/ttyUSB0 *must be used.
>> Also, on page 3, Steve says at point 8: DO NOT edit DMRGateway.ini
>> UNLESS your DV is not at /dev/ttyUSB0
>> If you run a first gen ThumbDV, the baud rate must be changed in it
>> also to 230400.
>> And for Steve: thank you very much for all the efforts in the software
>> and the documents.  I went thru it all, and except for the items
>> mentionned up here, everything went well and I’m ready for the next 
>> steps.
>> Thanks and 73s from Guy VE2VAG
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://lists.keekles.org/pipermail/allstar-digital/attachments/20170405/c4f77610/attachment.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> ------------------------------
>
> End of Allstar-Digital Digest, Vol 19, Issue 5
> **********************************************
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170407/2488524e/attachment.html>