[Allstar Digital] DMRGateway / DMRGui / DMRLink /ambe_audio / DV3000u /PiDV

[Peter]

################################################
# ambe_audio configuration file.
################################################

# DEFAULTS - General settings.  These values are
# inherited in each subsequent section (defined by section value).

[DEFAULTS]
debug = False                    # Debug output for each VOICE frame
outToFile = False                # Write each AMBE frame to a file called ambe.bin
outToUDP = True                    # Send each AMBE frame to the _sock object (turn on/off DMRGateway operation)
gateway = 127.0.0.1                # IP address of DMRGateway app
toGatewayPort = 31000                # Port DMRGateway is listening on for AMBE frames to decode
remoteControlPort = 31002            # Port that ambe_audio is listening on for remote control commands
fromGatewayPort = 31003                # Port to listen on for AMBE frames to transmit to all peers
gatewayDmrId = 2342425                # id to use when transmitting from the gateway
tgFilter = 23525                    # A list of TG IDs to monitor.  All TGs will be passed to DMRGateway
txTg = 23525                    # TG to use for all frames received from DMRGateway -> IPSC
txTs = 2                    # Slot to use for frames received from DMRGateway -> IPSC
#
# The section setting defines the current section to use.  By default, the ‘ENABLED’ section in dmrlink.cfg is used.
# Any values in the named section override the values from the DEFAULTS section.  For example, if the BM section
# has a value for gatewayDmrId it would override the value above.  Only one section should be set here.  Think
# of this as an easy way to switch between several different configurations with a single line.
#
section = BM                    # Use BM section values
# section = Sandbox                # Use SANDBOX section values

[BM]                        # BrandMeister
tgFilter = 23525                # A list of TG IDs to monitor.  All TGs will be passed to DMRGateway
txTg = 23525                    # TG to use for all frames received from DMRGateway -> IPSC
txTs = 1                    # Slot to use for frames received from DMRGateway -> IPSC






On 11/04/2017 00:22, Steve Zingman wrote:
Post your ambe_audio.cfg

On 04/10/2017 07:20 PM, Peter wrote:

Been doing a bit more experimenting with this, something weird is going on.

My source ID is 2342425 and the destination ID should be TG234525

But, see attached, any ideas?


Peter


On 06/04/2017 13:23, Steve Zingman wrote:


As peter has mentioned, Mike and I have been working on updating
ambe_audio to work with the current version of DMRlink.
Right now traffic from ASL is passing to DMR without error. Mike has a
capture of the latest error when passing traffic from DMR to analog.
Due to the nature of DMRlink, we have to squash a bug and move on to
the next. This does take time.  Stay tuned.

73, Steve N4IRS


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.org<mailto:Allstar-Digital at lists.keekles.org>
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital




_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.org<mailto:Allstar-Digital at lists.keekles.org>
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital





_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.org<mailto:Allstar-Digital at lists.keekles.org>
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170410/ad978405/attachment.html>