[Allstar Digital] DMRGateway / DMRGui / DMRLink /ambe_audio / DV3000u /PiDV

[Steve Zingman]

Post your dmrlink.cfg

On 04/10/2017 07:26 PM, Peter wrote:
>
> ################################################
> # ambe_audio configuration file.
> ################################################
>
> # DEFAULTS - General settings.  These values are
> # inherited in each subsequent section (defined by section value).
>
> [DEFAULTS]
> debug = False                    # Debug output for each VOICE frame
> outToFile = False                # Write each AMBE frame to a file 
> called ambe.bin
> outToUDP = True                    # Send each AMBE frame to the _sock 
> object (turn on/off DMRGateway operation)
> gateway = 127.0.0.1                # IP address of DMRGateway app
> toGatewayPort = 31000                # Port DMRGateway is listening on 
> for AMBE frames to decode
> remoteControlPort = 31002            # Port that ambe_audio is 
> listening on for remote control commands
> fromGatewayPort = 31003                # Port to listen on for AMBE 
> frames to transmit to all peers
> gatewayDmrId = 2342425                # id to use when transmitting 
> from the gateway
> tgFilter = 23525                    # A list of TG IDs to monitor.  
> All TGs will be passed to DMRGateway
> txTg = 23525                    # TG to use for all frames received 
> from DMRGateway -> IPSC
> txTs = 2                    # Slot to use for frames received from 
> DMRGateway -> IPSC
> #
> # The section setting defines the current section to use.  By default, 
> the ‘ENABLED’ section in dmrlink.cfg is used.
> # Any values in the named section override the values from the 
> DEFAULTS section.  For example, if the BM section
> # has a value for gatewayDmrId it would override the value above.  
> Only one section should be set here.  Think
> # of this as an easy way to switch between several different 
> configurations with a single line.
> #
> section = BM                    # Use BM section values
> # section = Sandbox                # Use SANDBOX section values
>
> [BM]                        # BrandMeister
> tgFilter = 23525                # A list of TG IDs to monitor. All TGs 
> will be passed to DMRGateway
> txTg = 23525                    # TG to use for all frames received 
> from DMRGateway -> IPSC
> txTs = 1                    # Slot to use for frames received from 
> DMRGateway -> IPSC
>
>
>
>
>
>
> On 11/04/2017 00:22, Steve Zingman wrote:
>> Post your ambe_audio.cfg
>>
>> On 04/10/2017 07:20 PM, Peter wrote:
>>> Been doing a bit more experimenting with this, something weird is going on.
>>>
>>> My source ID is 2342425 and the destination ID should be TG234525
>>>
>>> But, see attached, any ideas?
>>>
>>>
>>> Peter
>>>
>>>
>>> On 06/04/2017 13:23, Steve Zingman wrote:
>>>> As peter has mentioned, Mike and I have been working on updating
>>>> ambe_audio to work with the current version of DMRlink.
>>>> Right now traffic from ASL is passing to DMR without error. Mike has a
>>>> capture of the latest error when passing traffic from DMR to analog.
>>>> Due to the nature of DMRlink, we have to squash a bug and move on to
>>>> the next. This does take time.  Stay tuned.
>>>>
>>>> 73, Steve N4IRS
>>>>
>>>>
>>>> _______________________________________________
>>>> Allstar-Digital mailing list
>>>> Allstar-Digital at lists.keekles.org
>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170410/5dae55be/attachment.html>