[Allstar Digital] DMRGateway testing

[Steve Zingman]

Richard,
Take a look at 
<https://github.com/N4IRS/DMRGateway/raw/master/Draft%20DMRGateway%20Install%20notes.odt>
Pay attention to the testing of communications with the DV3000

73, Steve N4IRS

On 04/12/2017 11:33 PM, Richard Aubin wrote:
> I am not very hot in Brandmeister opération and  configuration. ..
> My  DMRlink can log on server 3108.on port 55001.
> The Last Heard windows shows every transmission I make on TG 3027.
> Every transmission from DMRlink triggers the ptt on my repeater on 
> tg3027. But ..... No audio except a low level hish ....
> Is there something more that needs to be done on the server.?????
> I asking because I don't have a clue.
> I contacter Ve2vb Who is looking after  BM  3021 for info  abt their 
> SmartPtt
> port. Waiting for his answer....
> .
> Thanks for your help.....
>
> Richard
>
> Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe at repeater.net 
> <mailto:n3fe at repeater.net>> a écrit :
>
>     Have you been setup on the server for smart Ptt?
>
>     Corey n3fe
>
>     Sent from my iPhone
>
>     On Apr 12, 2017, at 5:35 PM, <ve2dje at gmail.com
>     <mailto:ve2dje at gmail.com>> <ve2dje at gmail.com
>     <mailto:ve2dje at gmail.com>> wrote:
>
>>     Hi to everyone .
>>
>>     My  DMR Gateway  software suite is installed and all the testing
>>     in  the procedure are OK..
>>
>>     I am connecting to  Brandmeister 3108  port 55001  TG 3027 .
>>
>>     All response are OK .
>>
>>     The Brandmeister site shows my  DMRlink on the Last Heard window
>>     as a  Smart PTT Bridge
>>
>>     My DMRGAteway  windows shows  the connection to 127.0.0.1 port
>>     31000 and to my
>>
>>     AST  USRP 34001
>>
>>     When I do PTT  and test audio from  Iaxrpt connected  to my node .
>>
>>     The  RED and Green leds on th Thumbsb are flashing. LH list on
>>     the server is updated .
>>
>>     My DMRGatewy windows shows   “Connected ( PTT asserted)” and
>>     “Disconnected  ( PTT off)” when released
>>
>>     My ambe_audio windows  shows  `” INFO Transmit from gateway to
>>     TG3027:” then  “INFO Transmit complete “ on  PTT release
>>
>>     My test MMDVM repeater opened on  TG 3027  receives a PTT  from
>>     network.
>>
>>     BUT  No audio ( only faint high frequency buzz )
>>
>>     No activity on Hoseline  even if Last Heard is being updated.....
>>
>>     Any hints as how to test the ThumbDV output ???
>>
>>     Have been experimenting  with the outputAudioDevice in
>>     DMRGateway.ini without success.....
>>
>>     Deffective ThumbDV ?????? . How can I make shure ????
>>
>>     Also I am hearing some audio out on AST node that is not coming
>>     from TG3027 ??????
>>
>>     My entry in ambe_audio.cfg is  TGfilter =  3027,4327
>>
>>     Loaded the system twice  from scratch and ..... Same.....
>>
>>     Thanks for any advice
>>
>>     Richard VE2DJE
>>
>>     Provenance : Courrier
>>     <https://go.microsoft.com/fwlink/?LinkId=550986> pour Windows 10
>>
>>     _______________________________________________
>>     Allstar-Digital mailing list
>>     Allstar-Digital at lists.keekles.org
>>     <mailto:Allstar-Digital at lists.keekles.org>
>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>     <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital>
>
>     _______________________________________________
>     Allstar-Digital mailing list
>     Allstar-Digital at lists.keekles.org
>     <mailto:Allstar-Digital at lists.keekles.org>
>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>     <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital>
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170413/a4f4d9f5/attachment.html>