[Allstar Digital] DMRGateway testing

Thu Apr 13 23:05:01 EDT 2017

Steve : I was already using the procedure last version . reinstalled and checked all twice .
ThumbDV responds normally to test and  also in  DMRGateway  screen….
Same result ( NO AUDIO) on DIAL_RAT_RC1  or  on Raspbian Jessie
 (  I figured out  my first problem  with Jessie ) 

Corey : I will send you a copy of your email to Ben VE2VB  so  he can contact you .  BM server 3021 does not  answers back to my  Peer connection on port  55001  . BM 3108 does respond properly  with same config….
Could you  suggest  Ben  which TG I should use for testing  the setup ?????

 Questions  to help me troubleshoot :

DMRGateway..ini entry for  outputAudioDevice =  /dev/null   Will a  suitable audio device configured in 	DMRGateway.ini could confirm the quality of the audio sent from AST  Chan_USRP to DMRGateway ????	Any clue on  how to  set up audio devices on  DIAL ?????   Will try on Raspbian Jessie….

My mmdvm repeater is also hooked to BM3108 on port  62031 … Could there be any conflict  running 2 	apps to a BM server from the same public IP ????? (  2 different Rpi3 inside)

Is there another  TG that is known to  work properly on BM3108 with  DMRGateway   ??????

Can you confirm that Hoseline is  working properly with SmartPtt apps ?????

 Here is  a file of all the apps screen startup  upu to PTT release   + my .ini  …

Is there a audio test that can be done using Windows or Linux for ThumbDV ( Kind of a Loopback test ???)

Thanks 

 Richard

Provenance : Courrier pour Windows 10

De : Steve Zingman
Envoyé le :jeudi 13 avril 2017 06:15
À : Digital linking using Asterisk and app_rpt
Objet :Re: [Allstar Digital] DMRGateway testing

Richard,
Take a look at <https://github.com/N4IRS/DMRGateway/raw/master/Draft%20DMRGateway%20Install%20notes.odt>
Pay attention to the testing of communications with the DV3000

73, Steve N4IRS
On 04/12/2017 11:33 PM, Richard Aubin wrote:
I am not very hot in Brandmeister opération and  configuration. .. 
My  DMRlink can log on server 3108.on port 55001.
The Last Heard windows shows every transmission I make on TG 3027.
Every transmission from DMRlink triggers the ptt on my repeater on tg3027. But ..... No audio except a low level hish ....
Is there something more that needs to be done on the server.?????
I asking because I don't have a clue.
I contacter Ve2vb Who is looking after  BM  3021 for info  abt their SmartPtt
port. Waiting for his answer....
.
Thanks for your help.....

Richard

Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe at repeater.net> a écrit :
Have you been setup on the server for smart Ptt?

Corey n3fe 

Sent from my iPhone

On Apr 12, 2017, at 5:35 PM, <ve2dje at gmail.com> <ve2dje at gmail.com> wrote:
Hi to everyone .
My  DMR Gateway  software suite is installed and all the testing in  the procedure are OK..

I am connecting to  Brandmeister 3108  port 55001  TG 3027 .

All response are OK .

The Brandmeister site shows my  DMRlink on the Last Heard window as a  Smart PTT Bridge

My DMRGAteway  windows shows  the connection to 127.0.0.1 port 31000 and to my 
AST  USRP 34001

When I do  PTT  and test audio from  Iaxrpt connected  to my node .

The  RED  and Green leds on th Thumbsb are flashing. LH list on the server is updated .
My DMRGatewy windows shows   “Connected ( PTT asserted)” and  “Disconnected  ( PTT off)” when released
My ambe_audio windows  shows  `” INFO Transmit from gateway to TG3027:” then  “INFO Transmit complete “ on  PTT release

My test   MMDVM repeater opened on  TG 3027  receives a PTT  from network.

BUT  No audio ( only faint high frequency buzz )

No activity on Hoseline  even if Last Heard is being updated.....

Any hints as how to test the ThumbDV output ???

Have been experimenting  with the outputAudioDevice in DMRGateway.ini without success.....

Deffective ThumbDV ?????? . How can I make shure ????

Also I am hearing some audio out on AST node that is not coming from TG3027 ??????

My entry in  ambe_audio.cfg is  TGfilter =  3027,4327

Loaded the system twice  from scratch and ..... Same.....

Thanks for any advice

Richard VE2DJE

Provenance : Courrier pour Windows 10

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170413/bc85572b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DMRGAteway_test
Type: application/octet-stream
Size: 18409 bytes
Desc: not available
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170413/bc85572b/attachment.obj>