[Allstar Digital] New MMDVM Audio board to debut. INADVM

[David KE6UPI]

Hey Steve, Are you guy making a board that goes on a RasPi and bypass the
Arduino?

David
KE6UPI

On Thu, Apr 6, 2017 at 8:27 AM, Steve Zingman <szingman at msgstor.com> wrote:

> Due to the nature of the list, I think this is a appropriate place to make
> a advanced product announcement.
>
> Kevin W3KKC, Mike N4IRR and I have been working on a line of MMDVM audio
> boards called INADVM. The product is produced and shipped from the US.  The
> first version of the board is for the Arduino Due. It uses multi-turn pots
> for receive and transmit audio. The radio connector is a DB-9. A 12 MHz
> TCXO is included. On the board are LEDs for Power, PTT and Data detect. Now
> or the fun part. The design is through hole (not surface mount) except for
> the the voltage regulator and the TCXO. Those 2 parts will be pre-mounted
> the rest of the board will be a kit. You will receive the PC board with the
> regulator and TCXO mounted and all the parts needed, schematic and board
> layout. All ready to assemble. No surface mounted parts to solder. Sockets
> for the ICs. There will be a Assembled and Tested version also.
>
> Pricing:
> $35 for the kit plus shipping.
> $50 A&T plus shipping.
>
> The official introduction will be at the Dayton Hamfest. If possible We
> will have kits available before that.
> Sales will be through <http://www.masterscommunications.com/>
>
>
> --
> "Real programmers us vi, that's why I use nano"
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170419/51d79c5e/attachment.html>