[Allstar Digital] MMDVM and Vertex VXR-7000

[David KE6UPI]

Hello Michael, Have you tuned the ZUM board?

https://github.com/N4IRS/MMDVM-Install/wiki/MMDVM-Calibration

https://github.com/N4IRS/MMDVM-Install/wiki/pos-centre-threshold

Most users tune the Tx first then Rx.

As for the VXR-7000 I can't speak if it will work or not..

David
KE6UPI

On Fri, May 26, 2017 at 10:29 PM, Michael Hebert <mhebert1975 at gmail.com>
wrote:

> Group,
>
> I know this might be a little off subject. I have tried the MMDVM Yahoo
> group with no luck.
>
> Has anyone interface a Vertex VXR-7000 repeater to a MMDVM setup. I can't
> get DMR to work. The portable radio will key up 3 times then emit the long
> tone like the repeater is not there.
>
> Any help would be greatly appreciated!
>
> Michael KD5DFB
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170527/d41319d2/attachment.html>