[Allstar Digital] MMDVM and Vertex VXR-7000

[Michael Hebert]

David,

I have the new INADVM REV2 made by Kevin Custer W3KKC. I have tried to tune
it several times using this website.

https://www.f5uii.net/en/installation-calibration-adjustment-tunning-mmdvm-mmdvmhost-raspberry-motorola-gm360/5/

Thanks for the links! I am going to read thru them a give it a try.

Michael KD5DFB


On Sat, May 27, 2017 at 11:25 AM, David KE6UPI <dshaw at ke6upi.com> wrote:

> Hello Michael, Have you tuned the ZUM board?
>
> https://github.com/N4IRS/MMDVM-Install/wiki/MMDVM-Calibration
>
> https://github.com/N4IRS/MMDVM-Install/wiki/pos-centre-threshold
>
> Most users tune the Tx first then Rx.
>
> As for the VXR-7000 I can't speak if it will work or not..
>
> David
> KE6UPI
>
> On Fri, May 26, 2017 at 10:29 PM, Michael Hebert <mhebert1975 at gmail.com>
> wrote:
>
>> Group,
>>
>> I know this might be a little off subject. I have tried the MMDVM Yahoo
>> group with no luck.
>>
>> Has anyone interface a Vertex VXR-7000 repeater to a MMDVM setup. I can't
>> get DMR to work. The portable radio will key up 3 times then emit the long
>> tone like the repeater is not there.
>>
>> Any help would be greatly appreciated!
>>
>> Michael KD5DFB
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170527/71060ebc/attachment.html>