[App_rpt] app_rpt.c test version 0-46-6

[Eric Tichansky]

URL not found... is it in SVN?

Eric NI3S

Steve Rodgers wrote:
> Well, I decided I didn't like the way the autopatch default overrides 
> (patchfarenddisconnect, patchnoct, patchdialtime) were implemented in 
> app_rpt.pre-0-46-4.c so I ripped them out and started over.
>
> This method provides much more flexibility. Instead of specifying settings in 
> the node configuration block, you now override the defaults in the function 
> block for autopatch up. In other words, autopatchup can can optionally take 
> comma delimited setting=value pairs.
>
> There are currently 5 setting=value pairs defined in app_rpt.pre-0-46-6.c:
>   
> context=string
>
> Override default context with "string"
>
> dialtime=ms
>
> Specify the max number of milliseconds between phone number )
>
> farenddisconnect=1
>
> Automatically disconnect when called party hangs up
>
> noct=1
>
> Don't send repeater courtesy tone during autopatch calls
>
> quiet=1
>
> Don't send dial tone, or connect messages. Do not send patch down message when 
> called party hangs up
>
>
> Example: 123=autopatchup,dialtime=20000,noct=1,farenddisconnect=1
>
> The example will set a 20 second limit on dial time between phone number 
> digits, not send the courtesy tone during the time the patch is up, and 
> disconnect the patch if the called party hangs up.
>
> By redoing this, we gain a whole bunch more flexibility because we can define 
> several different DTMF sequences for autopatchup which can direct the 
> autopatch to act differently. By defining 3 different patch up sequences, you 
> can now for example, have one for emergency numbers, one for normal numbers, 
> and one for system information messages. You can set the individual autopatch 
> up sequences to use different contexts which can then be added to 
> extensions.conf.
>
> Note: I did not remove the autopatch up and down messages from the telemetry 
> block. These are still there so that you can override the default up and down 
> messages.
>
> app_rpt.pre-0-46-6c can be downloaded from http://zapatatelephony.com using 
> the following URL:
>
> http://zapatatelephony.com/app_rpt.pre-0-46-6.c
>
> Note:  are running asterisk 1.2.7.1 or earlier, you will need to uncomment the 
> #define for OLD_ASTERISK at the top of the file.
>
> Steve WA6ZFT
>
>
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>   


-- 
Eric Tichansky
Administrator
LYLIX.NET 
http://lylix.net/

(724) 602-2264