[App_rpt] app_rpt.c test version 0-46-6

[Steve Rodgers]

Eric,

Yes app_rpt version 0.46 is in Digium  SVN as revision 29935 or later. 
Better to use the the released version as it has a notch filtering feature as 
well.

Steve.

On Monday 05 June 2006 17:12, Eric Tichansky wrote:
> URL not found... is it in SVN?
>
> Eric NI3S
>
> Steve Rodgers wrote:
> > Well, I decided I didn't like the way the autopatch default overrides
> > (patchfarenddisconnect, patchnoct, patchdialtime) were implemented in
> > app_rpt.pre-0-46-4.c so I ripped them out and started over.
> >
> > This method provides much more flexibility. Instead of specifying
> > settings in the node configuration block, you now override the defaults
> > in the function block for autopatch up. In other words, autopatchup can
> > can optionally take comma delimited setting=value pairs.
> >
> > There are currently 5 setting=value pairs defined in
> > app_rpt.pre-0-46-6.c:
> >
> > context=string
> >
> > Override default context with "string"
> >
> > dialtime=ms
> >
> > Specify the max number of milliseconds between phone number )
> >
> > farenddisconnect=1
> >
> > Automatically disconnect when called party hangs up
> >
> > noct=1
> >
> > Don't send repeater courtesy tone during autopatch calls
> >
> > quiet=1
> >
> > Don't send dial tone, or connect messages. Do not send patch down message
> > when called party hangs up
> >
> >
> > Example: 123=autopatchup,dialtime=20000,noct=1,farenddisconnect=1
> >
> > The example will set a 20 second limit on dial time between phone number
> > digits, not send the courtesy tone during the time the patch is up, and
> > disconnect the patch if the called party hangs up.
> >
> > By redoing this, we gain a whole bunch more flexibility because we can
> > define several different DTMF sequences for autopatchup which can direct
> > the autopatch to act differently. By defining 3 different patch up
> > sequences, you can now for example, have one for emergency numbers, one
> > for normal numbers, and one for system information messages. You can set
> > the individual autopatch up sequences to use different contexts which can
> > then be added to extensions.conf.
> >
> > Note: I did not remove the autopatch up and down messages from the
> > telemetry block. These are still there so that you can override the
> > default up and down messages.
> >
> > app_rpt.pre-0-46-6c can be downloaded from http://zapatatelephony.com
> > using the following URL:
> >
> > http://zapatatelephony.com/app_rpt.pre-0-46-6.c
> >
> > Note:  are running asterisk 1.2.7.1 or earlier, you will need to
> > uncomment the #define for OLD_ASTERISK at the top of the file.
> >
> > Steve WA6ZFT
> >
> >
> >
> > _______________________________________________
> > App_rpt mailing list
> > App_rpt at lists.illiana.net
> > http://lists.illiana.net/mailman/listinfo/app_rpt