[App_rpt] Ft897 Remote problem

[Gary]

My FT897 is not reacting properly to the remote commands. Scan and step 
sort of work, nothing else. A mode change locks the front panel.

I have the CAT Baud rate set to 9600.

What am I missing here?

What is the "user login" function for?

Here is my config.

[1022]						
rxchannel = Zap/1				
remote=ft897					
functions = functions-remote		
phone_functions = functions-remote		
ioport = /dev/ttyS0

[functions-remote]
11=remote,2                             ; Set freq.
12=remote,119                           ; Tune
13=remote,6                             ; Set mode

21=remote,101                           ; Rx PL on
22=remote,4                             ; Set rx PL tone
23=remote,100                           ; Rx PL off
24=remote,103                           ; Tx PL on
25=remote,3                             ; Set tx PL tone
26=remote,102                           ; Tx PL off

31=remote,104                           ; Low Power
32=remote,105                           ; Medium Power
33=remote,106                           ; High Power

41=remote,110                           ; Bump +20
42=remote,111                           ; Bump +100
43=remote,112                           ; Bump +500
44=remote,107                           ; Bump -20
45=remote,108                           ; Bump -100
46=remote,109                           ; Bump -500

71=remote,116                           ; Scan + slow
72=remote,117                           ; Scan + quick
73=remote,118                           ; Scan + fast
74=remote,113                           ; Scan - slow
75=remote,114                           ; Scan - quick
76=remote,115                           ; Scan - fast

61=remote,5                             ; Long status query
60=remote,140                           ; Short status query

99=remote,99                            ; User login

0=cop,6					    ; Phone PTT


Gary