[App_rpt] Remote Base Authlevel: Was Ft897 Remote problem

[Gary]

Thanks Steve, that is what I was looking for.


Gary
__________________________________________
Gary Young
Telecommunication Engineering Associates
Tel: 650.590.1802     Fax: 650.590.1872

Steve Rodgers wrote:
> [1234]
> functions=functions-remode
> ; Auth level for remote base nodes
> ;0 = logins disabled (default) 
> ;1 = require login, but do not prompt,
> ;2=require login and prompt
> authlevel = 1
> 
> [functions-remote]
> ;
> ; User passwords for use with authlevel > 1. 
> ; Define one function for each user so each user has a separate access code.
> ; Passwords are variable in length and can be as long or as short as desired.
> ; Each password takes four arguments: the 'remote' keyword, the method (99), 
> ; the announce callsign, and a license class designator. Note that the license
> ; class designator ignored at this time by app_rpt, but future versions will
> ; limit license classes to appropriate HF subbands.
> ;
> ; Users must log in within a time out period, or the remote base will
> ; automatically disconnect. Once a user successully logs in, the callsign
> ; of the user will be announced. (You will need to add the additional 
> ; sound files to support the voice prompts if you are upgrading an 
> ; existing installation).
> ;
> 845678=remote,99,WB6NIL,G
> 88765=remote,99,WA6ZFT,E 
> 
> 
> 
> 
> On Thursday 16 November 2006 07:59, Gary wrote:
>> Please send a sample authlevel setup as I have not found any info on how
>> to set it up in the rpt.conf file.
>>
>> I am using a Yaesu CT-62 level converter.
>>
>> Do I need to set the CPU serial port speed/bits etc in Linux first?
>>
>> I can look at the serial data tonight and try the default command settings.
>>
>> Gary
>>
>> Steve Rodgers wrote:
>>> Gary,
>>>
>>> The login function can be used to get unauthorized users from accessing a
>>> remote base. If the authlevel is a 1 or 2 in the node config block, it
>>> will prevent the remote base from being used until a password is entered.
>>> The default authlevel is 0 (off). You may have several login entries
>>> defined to allow each user to have their own password. At some point we
>>> may also allow logins to be limited to HF subbands by license class.
>>>
>>> Regarding the issues with your FT897 setup:
>>>
>>> Do you have anything you can hook up to the serial port and grab what is
>>> being sent to the radio? We'd like to know if what is being sent is
>>> correct, and verify the baud rate is set correctly.
>>>
>>> Have you tried using the default command settings? Do they act any
>>> differently?
>>>
>>> One other question, what are to using to shift the levels from RS-232 to
>>> TTL?
>>>
>>> Steve,
>>>
>>> WA6ZFT
>>>
>>> On Wednesday 15 November 2006 23:54, Gary wrote:
>>>> My FT897 is not reacting properly to the remote commands. Scan and step
>>>> sort of work, nothing else. A mode change locks the front panel.
>>>>
>>>> I have the CAT Baud rate set to 9600.
>>>>
>>>> What am I missing here?
>>>>
>>>> What is the "user login" function for?
>>>>
>>>> Here is my config.
>>>>
>>>> [1022]
>>>> rxchannel = Zap/1
>>>> remote=ft897
>>>> functions = functions-remote
>>>> phone_functions = functions-remote
>>>> ioport = /dev/ttyS0
>>>>
>>>> [functions-remote]
>>>> 11=remote,2                             ; Set freq.
>>>> 12=remote,119                           ; Tune
>>>> 13=remote,6                             ; Set mode
>>>>
>>>> 21=remote,101                           ; Rx PL on
>>>> 22=remote,4                             ; Set rx PL tone
>>>> 23=remote,100                           ; Rx PL off
>>>> 24=remote,103                           ; Tx PL on
>>>> 25=remote,3                             ; Set tx PL tone
>>>> 26=remote,102                           ; Tx PL off
>>>>
>>>> 31=remote,104                           ; Low Power
>>>> 32=remote,105                           ; Medium Power
>>>> 33=remote,106                           ; High Power
>>>>
>>>> 41=remote,110                           ; Bump +20
>>>> 42=remote,111                           ; Bump +100
>>>> 43=remote,112                           ; Bump +500
>>>> 44=remote,107                           ; Bump -20
>>>> 45=remote,108                           ; Bump -100
>>>> 46=remote,109                           ; Bump -500
>>>>
>>>> 71=remote,116                           ; Scan + slow
>>>> 72=remote,117                           ; Scan + quick
>>>> 73=remote,118                           ; Scan + fast
>>>> 74=remote,113                           ; Scan - slow
>>>> 75=remote,114                           ; Scan - quick
>>>> 76=remote,115                           ; Scan - fast
>>>>
>>>> 61=remote,5                             ; Long status query
>>>> 60=remote,140                           ; Short status query
>>>>
>>>> 99=remote,99                            ; User login
>>>>
>>>> 0=cop,6					    ; Phone PTT
>>>>
>>>>
>>>> Gary
>>>> _______________________________________________
>>>> App_rpt mailing list
>>>> App_rpt at lists.illiana.net
>>>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>> _______________________________________________
>>> App_rpt mailing list
>>> App_rpt at lists.illiana.net
>>> http://lists.illiana.net/mailman/listinfo/app_rpt
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt