[App_rpt] Telco PTT
hwstar at rodgers.sdcoxmail.com
hwstar at rodgers.sdcoxmail.com
Sat Nov 18 16:35:10 UTC 2006
Jim thinks these are both are good ideas we will look in to it.
>
> From: Gary <gary at tcomeng.com>
> Date: 2006/11/17 Fri AM 09:19:59 PST
> To: Asterisk Repeater Controler <app_rpt at lists.illiana.net>
> Subject: [App_rpt] Telco PTT
>
> We have lots of telco connect usage on our system utilizing the Tel PTT
> feature to comm over the radio. Occasionally people forget there PTT is
> active.
>
> Is there a way to put an enunciation tone on the Telco RX audio when the
> PTT is active? Maybe a beep every 20 seconds or such to remind you that
> the PTT is active?
>
> Another idea would be to have a Tel PTT Time out timer to limit how long
> the PTT is active.
>
> Anyone have any thoughts on this?
>
>
> Gary
> ___________________
> Gary Young - K6HN
>
>
> Steve Rodgers wrote:
> > [1234]
> > functions=functions-remode
> > ; Auth level for remote base nodes
> > ;0 = logins disabled (default)
> > ;1 = require login, but do not prompt,
> > ;2=require login and prompt
> > authlevel = 1
> >
> > [functions-remote]
> > ;
> > ; User passwords for use with authlevel > 1.
> > ; Define one function for each user so each user has a separate access code.
> > ; Passwords are variable in length and can be as long or as short as desired.
> > ; Each password takes four arguments: the 'remote' keyword, the method (99),
> > ; the announce callsign, and a license class designator. Note that the license
> > ; class designator ignored at this time by app_rpt, but future versions will
> > ; limit license classes to appropriate HF subbands.
> > ;
> > ; Users must log in within a time out period, or the remote base will
> > ; automatically disconnect. Once a user successully logs in, the callsign
> > ; of the user will be announced. (You will need to add the additional
> > ; sound files to support the voice prompts if you are upgrading an
> > ; existing installation).
> > ;
> > 845678=remote,99,WB6NIL,G
> > 88765=remote,99,WA6ZFT,E
> >
> >
> >
> >
> > On Thursday 16 November 2006 07:59, Gary wrote:
> >> Please send a sample authlevel setup as I have not found any info on how
> >> to set it up in the rpt.conf file.
> >>
> >> I am using a Yaesu CT-62 level converter.
> >>
> >> Do I need to set the CPU serial port speed/bits etc in Linux first?
> >>
> >> I can look at the serial data tonight and try the default command settings.
> >>
> >> Gary
> >>
> >> Steve Rodgers wrote:
> >>> Gary,
> >>>
> >>> The login function can be used to get unauthorized users from accessing a
> >>> remote base. If the authlevel is a 1 or 2 in the node config block, it
> >>> will prevent the remote base from being used until a password is entered.
> >>> The default authlevel is 0 (off). You may have several login entries
> >>> defined to allow each user to have their own password. At some point we
> >>> may also allow logins to be limited to HF subbands by license class.
> >>>
> >>> Regarding the issues with your FT897 setup:
> >>>
> >>> Do you have anything you can hook up to the serial port and grab what is
> >>> being sent to the radio? We'd like to know if what is being sent is
> >>> correct, and verify the baud rate is set correctly.
> >>>
> >>> Have you tried using the default command settings? Do they act any
> >>> differently?
> >>>
> >>> One other question, what are to using to shift the levels from RS-232 to
> >>> TTL?
> >>>
> >>> Steve,
> >>>
> >>> WA6ZFT
> >>>
> >>> On Wednesday 15 November 2006 23:54, Gary wrote:
> >>>> My FT897 is not reacting properly to the remote commands. Scan and step
> >>>> sort of work, nothing else. A mode change locks the front panel.
> >>>>
> >>>> I have the CAT Baud rate set to 9600.
> >>>>
> >>>> What am I missing here?
> >>>>
> >>>> What is the "user login" function for?
> >>>>
> >>>> Here is my config.
> >>>>
> >>>> [1022]
> >>>> rxchannel = Zap/1
> >>>> remote=ft897
> >>>> functions = functions-remote
> >>>> phone_functions = functions-remote
> >>>> ioport = /dev/ttyS0
> >>>>
> >>>> [functions-remote]
> >>>> 11=remote,2 ; Set freq.
> >>>> 12=remote,119 ; Tune
> >>>> 13=remote,6 ; Set mode
> >>>>
> >>>> 21=remote,101 ; Rx PL on
> >>>> 22=remote,4 ; Set rx PL tone
> >>>> 23=remote,100 ; Rx PL off
> >>>> 24=remote,103 ; Tx PL on
> >>>> 25=remote,3 ; Set tx PL tone
> >>>> 26=remote,102 ; Tx PL off
> >>>>
> >>>> 31=remote,104 ; Low Power
> >>>> 32=remote,105 ; Medium Power
> >>>> 33=remote,106 ; High Power
> >>>>
> >>>> 41=remote,110 ; Bump +20
> >>>> 42=remote,111 ; Bump +100
> >>>> 43=remote,112 ; Bump +500
> >>>> 44=remote,107 ; Bump -20
> >>>> 45=remote,108 ; Bump -100
> >>>> 46=remote,109 ; Bump -500
> >>>>
> >>>> 71=remote,116 ; Scan + slow
> >>>> 72=remote,117 ; Scan + quick
> >>>> 73=remote,118 ; Scan + fast
> >>>> 74=remote,113 ; Scan - slow
> >>>> 75=remote,114 ; Scan - quick
> >>>> 76=remote,115 ; Scan - fast
> >>>>
> >>>> 61=remote,5 ; Long status query
> >>>> 60=remote,140 ; Short status query
> >>>>
> >>>> 99=remote,99 ; User login
> >>>>
> >>>> 0=cop,6 ; Phone PTT
> >>>>
> >>>>
> >>>> Gary
> >>>> _______________________________________________
> >>>> App_rpt mailing list
> >>>> App_rpt at lists.illiana.net
> >>>> http://lists.illiana.net/mailman/listinfo/app_rpt
> >>> _______________________________________________
> >>> App_rpt mailing list
> >>> App_rpt at lists.illiana.net
> >>> http://lists.illiana.net/mailman/listinfo/app_rpt
> > _______________________________________________
> > App_rpt mailing list
> > App_rpt at lists.illiana.net
> > http://lists.illiana.net/mailman/listinfo/app_rpt
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
More information about the App_rpt-users
mailing list