[App_rpt] app_rpt setup and requirements.

[Jim Duuuude]

As I said, with an ARIB board you would use a PC's serial port for CAT.

I am not familiar with a '787', but (I believe) according to Yaesu, CAT 
should be the same on all
radios that support it. I just know it works on the 897 and like radios.

>From: "Gary Young" <pcfrover at tcomeng.com>
>Reply-To: pcfrover at tcomeng.com,Asterisk Repeater Controler 
><app_rpt at lists.illiana.net>
>To: "'Asterisk Repeater Controler'" <app_rpt at lists.illiana.net>
>Subject: Re: [App_rpt] app_rpt setup and requirements.
>Date: Mon, 9 Oct 2006 09:03:40 -0700
>MIME-Version: 1.0
>Received: from lists.illiana.net ([207.227.243.140]) by 
>bay0-mc9-f8.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.2444); Mon, 9 
>Oct 2006 09:03:49 -0700
>Received: (qmail 3395 invoked from network); 9 Oct 2006 16:03:47 -0000
>Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1)  by 0 with SMTP; 9 
>Oct 2006 16:03:47 -0000
>Received: (qmail 3385 invoked from network); 9 Oct 2006 16:03:44 -0000
>Received: from sccrmhc14.comcast.net (204.127.200.84)by 0 with SMTP; 9 Oct 
>2006 16:03:44 -0000
>Received: from den (c-69-181-173-31.hsd1.ca.comcast.net[69.181.173.31])by 
>comcast.net (sccrmhc14) with SMTPid <2006100916034001400qq9pne>; Mon, 9 Oct 
>2006 16:03:44 +0000
>X-Message-Info: LsUYwwHHNt3660MmjhEvYg2f34OAemlKtU9j2Z7TuGo=
>Return-Path: <pcfrover at tcomeng.com>
>Delivered-To: mailman-app_rpt at lists.illiana.net
>X-Mailer: Microsoft Office Outlook 11
>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2962
>thread-index: AcbrcaBOJrGbAuozSGGWc/wmgygNOwASqXYw
>X-BeenThere: app_rpt at lists.illiana.net
>X-Mailman-Version: 2.1.6
>Precedence: list
>List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net>
>List-Unsubscribe: 
><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request at lists.illiana.net?subject=unsubscribe>
>List-Archive: <http://lists.illiana.net/pipermail/app_rpt>
>List-Post: <mailto:app_rpt at lists.illiana.net>
>List-Help: <mailto:app_rpt-request at lists.illiana.net?subject=help>
>List-Subscribe: 
><http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:app_rpt-request at lists.illiana.net?subject=subscribe>
>Errors-To: app_rpt-bounces at lists.illiana.net
>X-OriginalArrivalTime: 09 Oct 2006 16:03:49.0957 (UTC) 
>FILETIME=[82542750:01C6EBBC]
>
>Is a 'Quad PCI card' required for Yaseu CAT control of a 787 or can one of
>the standard PC serial ports be used?
>
>Gary
>
> > -----Original Message-----
> > From: app_rpt-bounces at lists.illiana.net
> > [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Jim Duuuude
> > Sent: Monday, October 09, 2006 12:07 AM
> > To: app_rpt at lists.illiana.net
> > Subject: Re: [App_rpt] app_rpt setup and requirements.
> >
> > As far as the CAT protocol goes, the ARIB board talks to the
> > "Packet Data
> > interface", the
> > 6 pin connector (I believe), which has the Tx and Rx audio,
> > PTT and COR. The
> > CAT protocol
> > goes through one of the serial ports on the PC. On the PCI
> > card, we talk to
> > the serial
> > port (CAT port) directly also, all through 1 8 pin cable,
> > (which forks off
> > to 2 connectors
> > one 6 pin and one 8 pin on the back of the Yaesu radio).
> >
> > Yes we fully support CAT in frequency/mode agile mode along
> > as well as the
> > Doug Hall RBI-1 as well as the Kenwood TM-G707.
> >
> > As far as Digium cards supporting E&M goes, I really think
> > there is VERY
> > little need
> > or desire for such things these days.  (Actually the FXS also
> > operates as a
> > DPT
> > like a DID trunk, which technially *is* a 2 wire loop-closure E&M
> > Interface).
> >
>
>_______________________________________________
>App_rpt mailing list
>App_rpt at lists.illiana.net
>http://lists.illiana.net/mailman/listinfo/app_rpt