[App_rpt] Can't monitor on node

[Renato Ornelas]

Hello dear friends!

I'm using a PCI Quad Radio card with a Motorola EM400 radio pluged in. I can
use a SIP phone to connect to the node (1999) and issue the PTT command
(*98) and deactivate it (#). I want to be able to listen to this channel
when I dial to the node but when I ask for the Link status (*7), all I
receive on the phone and on the remote radio is "node 1999 repeat_only". I
tried the duplex=2 option but it didnt work either.

Thanks in avance.

My rpt.conf:

;
; Your repeater
;

[1999]                          ; Name of First Repeater

rxchannel = Zap/1                       ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;rxnotch=1065,40                        ; Notch a particular frequency,
depth
                                        ; app_rpt must have been compiled
with
                                        ; the notch option
duplex=2
functions=functions                     ; Repeater Function Table
link_functions=link-functions           ; Link Function Table
phone_functions=functions               ; Phone Function table (reverse
patch)
telemetry=telemetry                     ; Telemetry descriptions
wait_times=wait-times                   ; Wait times
context = radio                         ; dialing context for phone
callerid = "Your Repeater" <6198192562> ; callerid for phone calls
idrecording = /etc/asterisk/id          ; id recording
accountcode=RADIO                       ; account code (optional)
hangtime=100                            ; squelch tail hang time (in ms)
(optional)
totime=180000                           ; transmit time-out time (in ms)
(optional)
idtime=300000                           ; id interval time (in ms)
(optional)

; The default values for hangtime, time-out time, and id interval time are
; 5 seconds (5000 ms),  3 minutes (180000 ms), and 5 minutes (300000 ms)
; respectively

politeid=30000                          ; time in milliseconds before ID
timer
                                        ; expires to try and ID in the tail.
                                        ; (optional, default is 30000).
idtalkover=|iid/r                       ; Talkover ID (optional) default is
none
unlinkedct=ct2                          ; unlinked courtesy tone (optional)
default is none

[functions]
1=ilink,1                               ; Specific link disconnect
2=ilink,2                               ; Specific Link connect -  monitor
only
3=ilink,3                               ; Specific Link connect - transceive
4=ilink,4                               ; Enter command mode on a specific
link
5=macro,1                               ; Command macros (Defined in the
macro section)
7=ilink,5                               ; Link status
984=ilink,7                             ; Last node to key us up

80=status,1                             ; System info
81=status,2                             ; Time
82=status,3                             ; app_rpt.c Version
87=ilink,15                             ; Global node query (all nodes in
network)

6=autopatchup
0=autopatchdn                           ; Autopatch down

; Control operator commands

919296=cop,1                            ; System warm boot
919297=cop,2                            ; System enable
919298=cop,3                            ; System disable
99=cop,4                                ; Audio test tone
98=cop,6                                ; Telephone key PTT



[link-functions]
1=ilink,1                               ; Specific link disconnect
2=ilink,2                               ; Specific Link connect -  monitor
only
3=ilink,3                               ; Specific Link connect - transceive
5=macro,1                               ; Command macros (Defined in the
macro section)
7=ilink,5                               ; Link status

80=status,1                             ; System info
81=status,2                             ; Time
82=status,3                             ; app_rpt.c Version
87=ilink,15                             ; Global node query (all nodes in
network)

6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000  ; Autopatch up
0=autopatchdn                           ; Autopatch down

[nodes]
1999 = radio at 127.0.0.1/1999,NONE        ; This must be changed to your node
number
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20070710/044c4a22/attachment.html>