[App_rpt] Still Looking for help to get the anode backup and

[Stephen Rodgers]

Will,

I can take a look with ssh if you show me how to log in.

Steve.



Will wrote:
> Steve,
> 
> I am back with CentOS as the OS system for asterisk and a lillte more.
> 
> I'm still have the same problems as before, there must be some configuration problem holding the system back from making the connections. After command line execution and external radio use here's what's happening.
> 
> a.) Node will not connect to remote node by command line commands
> 
> b.) Node will not connect by DTMF command from external radio.
> 
> c.) Notice duplex = 0 will not produce any audio on connections but will see the activity on the screen. Such as calling up *7, which produces no audio, but will see the responses on the screen.
> 
> d. ) Notice duplex = 1 & 3 will produce audio but within repeat mode and notice that it cancels out dtmf signal from incomming radios. I think this is the right responses for this action becuase duplex = 1 & 3 are define.
> 
> Action:
> 
> CLI> rpt fun 2059 *32010
> 
> ==Parsing '/var/lib/asterisk/rpt_extnodes': Not found (Permission denied)
> 
> ==Parsing '/var/lib/asterisk/rpt_extnodes': Not found (Permission denied)
> 
> ==Parsing '/var/lib/asterisk/rpt_extnodes': Not found (Permission denied)
> 
> ==Parsing '/var/lib/asterisk/rpt_extnodes': Not found (Permission denied)
> 
> ==Parsing '/var/lib/asterisk/rpt_extnodes': Not found (Permission denied)
> 
> 
> --<Zap/pseudo-901774610> Playing 'rpt/connection_failed'
> 
> In my case I should be running duplex = 0. If you would like to check in on the node and take a look I'm ready to send. Just let me know Thanks
> 
> Will / W4WWM
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt