[App_rpt] tail messages not working

[Stephen Rodgers]

Mark,

That would do it. Looking further, the error is in rpt.conf.sample which
needs to be fixed. We are in the process of switching repositories from
CVS to SVN. I updated the CVS copy, but need to update the SVN copy as well.


Steve.


Mark Hagler wrote:
> Steve,
> 
> I got the card in the mail today and that's what I am using to test
> with now.   Believe me I was very excited to see it so quickly!
> 
> My tail messages are working now, I found one minor difference
> compared to the lines you pasted into e-mail... I had "tailmessages="
> configured and not "tailmessagelist=" so a quick fix to the config
> file and it works.
> 
> One of the example configs I downloaded from the CVS repository shows
> the incorrect "tailmessages" config entry which is how I ended up with
> that, perhaps it got re-named somewhere along the line.
> 
> Anyway it works now, thank you for the help.
> 
> 
> 
> On 10/29/07, Stephen Rodgers <hwstar at rodgers.sdcoxmail.com> wrote:
>> Mark,
>>
>> This seems to work for me:
>>
>> tailmessagetime=2000
>>
>> tailsquashedtime=1000
>>
>> tailmessagelist=vm-and,vm-and,vm-and
>>
>> Are you sure that you put it in an active numeric stanza?
>> Also, do you have an idrecording defined, and is it working correctly?
>>
>> Additionally, I tried using files which didn't exist, and you do get an
>> error message at the console.
>>
>> Do you have multiple node stanzas in the config file? If you are using
>> the sample config file rpt.conf.sample, that could be the case?
>>
>> I have app_rpt version 0.76.
>>
>>
>>
>> P.S. I shipped your card on Saturday.
>>
>>
>> Steve.
>>
>>
>>
>> Mark Hagler wrote:
>>> Hello Everyone,
>>>
>>> I received the Analog Interface board today in the mail (Steve must
>>> have shipped it SUPER priority mail).   To play with the software
>>> quickly I just connected it via two Yaesu FT-7800R mobile radios (via
>>> the 6-pin DATA jacks) and it works very nicely.
>>>
>>> One thing that I can't get to work right is tail messages.  I put this
>>> in my config file:
>>>
>>> tailmessagetime=2000                    ; Play a tail message every 5 mins
>>> tailsquashedtime=1000                   ; If squashed by another user
>>> tailmessages=tail1,tail2,tail3          ;list of messages to be played
>>> for tail message
>>>
>>> And I have recorded a sample audio file and copied it three times
>>> (tail1.gsm, tail2.gsm, tail3.gsm).   It doesn't look like app_rpt is
>>> even trying to play tail messages, as in I do not get any errors on
>>> the Asterisk console about missing audio files.
>>>
>>> Just for testing I set the value to 2 seconds to get it to try to play
>>> the files but it's not.
>>>
>>> Any thoughts?
>>>
>>> Thanks,
>>>
>>> Mark
>>> _______________________________________________
>>> App_rpt mailing list
>>> App_rpt at lists.illiana.net
>>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>>
>> _______________________________________________
>> App_rpt mailing list
>> App_rpt at lists.illiana.net
>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>