[App_rpt] Problem tuning USB Radio Interface

[Jeff Lavoie]

I finally figured out that the PTT wire somehow had gotten moved and was 
just barely touching pin 14, not sure how this affected the receive 
tuning, but since I fixed that it worked fine. However, since I decided 
to re-solder the wire so that it was in a better position, I broke the 
pin off the chip. So as soon as I order another usb adapter or two, I'll 
be up and running. Thank you for the help.

Jeff

Roger F. Jordan Sr. wrote:
>
> Jeff Lavoie [wqex694 at wqex694.info] Wrote:
>
> >I seem to have a problem tuning the USB radio interface. Here'e what I 
> get in the CLI.
>
> >
>
> >*CLI> radio tune
>
> >Active radio interface is [usb]
>
> >Output A is currently set to composite.
>
> >Output B is currently set to voice.
>
> >Tx Voice Level currently set to 500
>
> >Tx Tone Level currently set to 200
>
> >Rx Squelch currently set to 500
>
> >Device String is 3-2
>
> >Usage: radio tune <function>
>
> > rxnoise
>
> > rxvoice
>
> > rxtone
>
> > rxsquelch [newsetting]
>
> > txvoice [newsetting]
>
> > txtone [newsetting]
>
> > auxvoice [newsetting]
>
> > save (settings to tuning file)
>
> > load (tuning settings from EEPROM)
>
> >
>
> > All [newsetting]'s are values 0-999
>
> >
>
> >*CLI> radio tune rxnoise
>
> >tune rxnoise maxtries=12, target=23000, tolerance=2000
>
> >tries=0, setting=2, meas=1
>
> >tries=1, setting=16, meas=1
>
> >tries=2, setting=16, meas=1
>
> >tries=3, setting=16, meas=1
>
> >tries=4, setting=16, meas=1
>
> >tries=5, setting=16, meas=1
>
> >tries=6, setting=16, meas=1
>
> >tries=7, setting=16, meas=1
>
> >tries=8, setting=16, meas=1
>
> >tries=9, setting=16, meas=1
>
> >tries=10, setting=16, meas=1
>
> >tries=11, setting=16, meas=1
>
> >DONE tries=12, setting=1000, meas=1
>
> >ERROR: RX INPUT ADJUST FAILED.
>
> >*CLI>
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >I know I have audio going into the device. When I made the 
> modifications to the usb device, I decided not to remove the >audio 
> output jack so that I may use it for testing purposes. So I plugged 
> some speakers in, went into alsamixer, un->muted the microphone, 
> turned it up a little, and I had sound from the radio without any 
> problems. So why can't asterisk >hear the sound when tuning? Have I 
> forgotten to do something else before trying this?
>
> >
>
> >Jeff
>
> Well I am getting the same thing except the Meas= is around 9-11 and 
> the final Done line reads tries=12 setting=1000 measure=10
>
> And I can’t get the usb fob to repeat!... however is does decode DTMF 
> in double… IE push the tone once and it shows up as being decoded 
> twice on the CLI… I am thinking I need to reinstall this EVB setup I 
> have been trying to get working!
>
> Anyone have any ideas??
>
> Best Regards,
>
> Roger W4RFJ
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>