[App_rpt] Hot TX audio

[Jim Duuuude]

a resistor or 2 is always good for that, since it also makes for better decoupling
and thats good when you have such a sensitive input.

> From: n9yty at n9yty.com
> To: app_rpt at lists.illiana.net
> Date: Mon, 14 Jul 2008 15:07:24 -0500
> Subject: [App_rpt] Hot TX audio
> 
> Hi all,
> 
> Just fishing for ideas...  I have my app_rpt node connected to a radio  
> right now via the mic input, and the audio is HOT.  Using the 'radio  
> tune txvoice' command, I get no audioble ouput when using a number  
> below 27, but anything over 50 or so drives the radio way way wide in  
> deviation and starts clipping.
> 
> I'm assuming that the parameter here is adjusting the volume on the  
> USB sound fob, and it's just too much for the rig...  Thinking a  
> resistor in the TX audio line would do it, any suggested for a  
> size? :)  Then I can run over to Radio Shack and pay them $3.95 for an  
> $0.18 resistor. LoL
> 
> Steve
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20080716/fe822018/attachment.html>