[App_rpt] URI configuration help
Roger F. Jordan Sr.
w4rfj at comcast.net
Sun Jul 20 20:22:54 UTC 2008
Thanks Steve,
Jim Dude, Did you get my applications??
Best Regards,
Roger W4RFJ
-----Original Message-----
From: app_rpt-bounces at lists.illiana.net
[mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Stephen Rodgers
Sent: Sunday, July 20, 2008 2:41 AM
To: Asterisk Repeater Controler
Subject: Re: [App_rpt] URI configuration help
Roger,
Jim WB6NIL does all pttlink registration work, at least for now.
Steve,
WA6ZFT
Roger F. Jordan Sr. wrote:
> Below are examples of MY SETUP as assisted by W9SH
>
> I removed the Functions but notice the phone functions use two different
> function lists for Phonepatch... They are not included for security
> reasons...
>
> I hope this helps!!!
>
> Also Steve, Did you get my apps for The GMRS, FRS and MURS and All the
> registrations for the different systems I applied for (or is that not you)
>
> I would also like to talk to You guys about Phone patch control...
>
> Best Regards to ALL
>
> Roger W4RFJ
>
> ; rpt.conf
> ; 20071103 0900 sphenke at xelatec.com
>
> ; Radio Repeater / Remote Base config for use with app_rpt
> ; manipulated by the app_rpt installation script
> ; text strings that begin with xxx_ should be manually edited
> ; if the install script does not replace them.
>
> [101]
> rxchannel = radio/usb
> duplex = 2
> functions = functions ; DTMF function list
> link_functions = functions-linked ; DTMF function list for link
> phone_functions = functions-phone-1 ; (optional) different functions for
> 'P' mode
> tonezone = us ; use US tones (default)
> context = from-internal ; dialing context for phone
> callerid = "de w4rfj/r"<445.95 pl100> ; Callerid for phone calls
> idrecording=|ide w4rfj/r
> accountcode=RADIO ; account code (optional)
> funcchar = * ; function lead-in character
> (defaults to '*')
> endchar = # ; command mode end character
> (defaults to '#')
> hangtime=10 ; squelch tail hang time (in ms)
> (optional)
> totime=180000 ; transmit time-out time (in ms)
> (optional)
> idtime=600000 ; id interval time (in ms)
> (optional)
> politeid=30000 ; time in milliseconds
before ID
> timer
> propagate_phonedtmf=yes ;propagate_phonedtmf = yes
> unlinkedct=ct1 ; DTMF sent to system from
phone
> gets
> ; repeated into main system output
> and
>
> [102]
> rxchannel = radio/usb1
> duplex = 0
> functions = functions ; DTMF function list
> link_functions = functions-linked ; DTMF function list for link
> phone_functions = functions-phone-1 ; different functions
> tonezone = us ; use US tones (default)
> context = from-internal ; dialing context for phone
> callerid = "wqex329"<FRS Channel 1> ; Callerid for phone calls
> idrecording=|iK
> accountcode=RADIO ; account code (optional)
> funcchar = * ; function lead-in character
> (defaults to '*')
> endchar = # ; command mode end character
> (defaults to '#')
> hangtime=3 ; squelch tail hang time (in ms)
> (optional)
> totime=180000 ; transmit time-out time (in ms)
> (optional)
> idtime=600000 ; id interval time (in ms)
> (optional)
> politeid=30000 ; time in milliseconds
before ID
> timer
> propagate_phonedtmf=no
>
> *************everything in between deals with DTMF Commands Etc...
>
> 101 = radio at 192.168.14.149:4569/101,NONE
> 102 = radio at 192.168.14.149:4569/102,NONE
>
> ; end of file - rpt.conf
>
> ------------------------------------------------------------------------
>
> ; usbradio.conf
> ; Configuration for chan_usbradio
> ; 20071205 0845 sphenke at xelatec.com
> ; refer to globals_rpt_custom.conf for variable definitions
> ;
> [general]
>
> rxcpusaver=0
> txcpusaver=0
>
> [usb]
> hwtype=0
> rxboost=1
> rxctcssrelax=0
> txctcssdefault=100.0
> rxctcssfreqs=100.0
> txctcssfreqs=100.0
> carrierfrom=dsp
> ctcssfrom=dsp
> rxdemod=flat
> txprelim=yes
> txtoctype=notone
> txmixa=composite
> txmixb=no
> invertptt=0
> ;rxfreq=445.950000
> ;txfreq=147.490000
> duplex=1
> eeprom=0
>
> [usb1]
> hwtype=0
> rxboost=1
> rxctcssrelax=1
> ;txctcssdefault=0
> ;rxctcssfreq=0
> ;txctcssfreq=0
> carrierfrom=vox
> ctcssfrom=no
> rxdemod=speaker
> txprelim=no
> txtoctype=no; notone
> txmixa=voice
> txmixb=no
> invertptt=0
> ;rxfreq=462.562500
> ;txfreq=462.562500
> duplex=0
> eeprom=0
>
>
>
>
> -----Original Message-----
> From: app_rpt-bounces at lists.illiana.net
> [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Stephen Rodgers
> Sent: Saturday, July 19, 2008 6:56 PM
> To: Asterisk Repeater Controler
> Subject: Re: [App_rpt] URI configuration help
>
> David,
>
> This is one area where our documentation falls short. We have got
> automated installs and config examples for single-node systems, but
> no examples for multi-node systems. Basically for each usb mode
> entries will need to be made in usbradio.conf, rpt.conf, and
> extensions.conf.
>
> *** usbradio.conf ***
>
>
> [general]
>
> ; Nothing in the general section for multiple devices.
>
> [usb] ; first node
> ; Insert all USB config options from usbradio.conf.sample here except
> ; for devicenum setting. Modify settings to suit configuration.
> .
> .
> .
> devicenum=0 ; unique for each device defined
> .
> .
> .
> [usb1] ; second node
> .
> .
> .
> devicenum=1
> .
> .
> .
>
> [usb2] ; third node
> .
> .
> .
> devicenum=2
> .
> .
> .
>
> *** extensions.conf ****
>
> exten => 1234,1,rpt,1234 # first node
> exten => 5678,1,rpt,5678 # second node
> exten => 9012,1,rpt,9012 # third node
>
>
> **** rpt.conf ****
>
> rpt.conf
>
> [1234] ; first node
> rxchannel = Radio/usb
> ; Configuration settings from rpt.conf.sample tailored to your
> application follow the channel definition above.
> .
> .
> .
> [5678] ; second node
> rxchannel = Radio/usb1
> ; Configuration settings from rpt.conf.sample tailored to your
> application follow the channel definition above.
> .
> .
> .
> [9012] ; third node
> rxchannel = Radio/usb2
> ; Configuration settings from rpt.conf.sample tailored to your
> application follow the channel definition above.
> .
> .
> .
>
>
> Standard disclaimer boilerplate: I tried to answer your question. I
> haven't tested what is documented above. I just did some quick research
> to come up with this answer, and the research was not in-depth, There
> may very well be something I left out, so your mileage may vary. There
> are no guarantees. If you find something and fix it, please post it back
> to the list so everyone will benefit from it.
>
>
> Steve
> WA6ZFT
>
>
>
> David McGough wrote:
>> Hi Everyone,
>>
>> I'm finally getting to "finish up" my URI based project and wondered if
>> someone could help point me to some advanced sample asterisk/app_rpt
>> config files (usbradio.conf, rpt.conf, primarily) for using the URI
>> adapters.
>>
>> I've currently got 1 URI working properly with my TKR-850 repeater. Now,
I
>> want to add 2 remote base radios for VHF and HF, do some linking, etc. I,
>> mainly need more info about the syntax to use with multiple URI's,
>> usbradio.conf options, etc.
>>
>> Thanks in advance!
>>
>> David KB4FXC
>>
>>
>>
>> _______________________________________________
>> App_rpt mailing list
>> App_rpt at lists.illiana.net
>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>
_______________________________________________
App_rpt mailing list
App_rpt at lists.illiana.net
http://lists.illiana.net/mailman/listinfo/app_rpt
More information about the App_rpt-users
mailing list