[App_rpt] URI configuration help

Sun Jul 20 06:41:24 UTC 2008

Roger,

Jim WB6NIL does all pttlink registration work, at least for now.

Steve,
WA6ZFT

Roger F. Jordan Sr. wrote:
> Below are examples of MY SETUP as assisted by W9SH
> 
> I removed the Functions but notice the phone functions use two different
> function lists for Phonepatch... They are not included for security
> reasons...
> 
> I hope this helps!!!
> 
> Also Steve,  Did you get my apps for The GMRS, FRS and MURS and All the
> registrations for the different systems I applied for (or is that not you)
> 
> I would also like to talk to You guys about Phone patch control... 
> 
> Best Regards to ALL 
> 
> Roger W4RFJ
> 
> ; rpt.conf
> ; 20071103 0900 sphenke at xelatec.com
> 
> ; Radio Repeater / Remote Base config for use with app_rpt
> ; manipulated by the app_rpt installation script
> ; text strings that begin with xxx_ should be manually edited
> ; if the install script does not replace them.
> 
> [101]
> rxchannel = radio/usb
> duplex = 2
> functions = functions 		        ; DTMF function list
> link_functions = functions-linked	; DTMF function list for link
> phone_functions = functions-phone-1	; (optional) different functions for
> 'P' mode
> tonezone = us				; use US tones (default)
> context = from-internal		; dialing context for phone
> callerid = "de w4rfj/r"<445.95 pl100>  	; Callerid for phone calls
> idrecording=|ide w4rfj/r
> accountcode=RADIO			; account code (optional)
> funcchar = *				; function lead-in character
> (defaults to '*')
> endchar = #			        ; command mode end character
> (defaults to '#')
> hangtime=10			        ; squelch tail hang time (in ms)
> (optional)
> totime=180000				; transmit time-out time (in ms)
> (optional)
> idtime=600000				; id interval time (in ms)
> (optional)
> politeid=30000				; time in milliseconds before ID
> timer
> propagate_phonedtmf=yes	    	        ;propagate_phonedtmf = yes
> unlinkedct=ct1 		                ; DTMF sent to system from phone
> gets
> 				        ; repeated into main system output
> and
> 
> [102]
> rxchannel = radio/usb1
> duplex = 0
> functions = functions 		        ; DTMF function list
> link_functions = functions-linked	; DTMF function list for link
> phone_functions = functions-phone-1	;  different functions 
> tonezone = us			        ; use US tones (default)
> context = from-internal		        ; dialing context for phone
> callerid = "wqex329"<FRS Channel 1>  	; Callerid for phone calls
> idrecording=|iK
> accountcode=RADIO			; account code (optional)
> funcchar = *				; function lead-in character
> (defaults to '*')
> endchar = #				; command mode end character
> (defaults to '#')
> hangtime=3				; squelch tail hang time (in ms)
> (optional)
> totime=180000				; transmit time-out time (in ms)
> (optional)
> idtime=600000				; id interval time (in ms)
> (optional)
> politeid=30000				; time in milliseconds before ID
> timer
> propagate_phonedtmf=no
> 
> *************everything in between deals with DTMF Commands Etc...
> 
> 101 = radio at 192.168.14.149:4569/101,NONE
> 102 = radio at 192.168.14.149:4569/102,NONE
> 
> ; end of file - rpt.conf
> 
> ------------------------------------------------------------------------
> 
> ; usbradio.conf
> ; Configuration for chan_usbradio
> ; 20071205 0845 sphenke at xelatec.com
> ; refer to globals_rpt_custom.conf for variable definitions
> ;
> [general]
> 
> rxcpusaver=0
> txcpusaver=0
> 
> [usb]
> hwtype=0
> rxboost=1
> rxctcssrelax=0
> txctcssdefault=100.0
> rxctcssfreqs=100.0
> txctcssfreqs=100.0
> carrierfrom=dsp
> ctcssfrom=dsp
> rxdemod=flat
> txprelim=yes
> txtoctype=notone
> txmixa=composite
> txmixb=no
> invertptt=0
> ;rxfreq=445.950000
> ;txfreq=147.490000
> duplex=1
> eeprom=0
> 
> [usb1]
> hwtype=0
> rxboost=1
> rxctcssrelax=1
> ;txctcssdefault=0
> ;rxctcssfreq=0
> ;txctcssfreq=0
> carrierfrom=vox
> ctcssfrom=no
> rxdemod=speaker
> txprelim=no
> txtoctype=no; notone
> txmixa=voice
> txmixb=no
> invertptt=0
> ;rxfreq=462.562500
> ;txfreq=462.562500
> duplex=0
> eeprom=0
> 
> 
> 
> 
> -----Original Message-----
> From: app_rpt-bounces at lists.illiana.net
> [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Stephen Rodgers
> Sent: Saturday, July 19, 2008 6:56 PM
> To: Asterisk Repeater Controler
> Subject: Re: [App_rpt] URI configuration help
> 
> David,
> 
> This is one area where our documentation falls short. We have got
> automated installs and config examples for single-node systems, but
> no examples for multi-node systems. Basically for each usb mode
> entries will need to be made in usbradio.conf, rpt.conf, and
> extensions.conf.
> 
> *** usbradio.conf ***
> 
> 
> [general]
> 
> ; Nothing in the general section for multiple devices.
> 
> [usb] ; first node
> ; Insert all USB config options from usbradio.conf.sample here except
> ; for devicenum setting. Modify settings to suit configuration.
> .
> .
> .
> devicenum=0 ; unique for each device defined
> .
> .
> .
> [usb1] ; second node
> .
> .
> .
> devicenum=1
> .
> .
> .
> 
> [usb2] ; third node
> .
> .
> .
> devicenum=2
> .
> .
> .
> 
> *** extensions.conf ****
> 
> exten => 1234,1,rpt,1234 # first node
> exten => 5678,1,rpt,5678 # second node
> exten => 9012,1,rpt,9012 # third node
> 
> 
> **** rpt.conf ****
> 
> rpt.conf
> 
> [1234] ; first node
> rxchannel = Radio/usb
> ; Configuration settings from rpt.conf.sample tailored to your
> application follow the channel definition above.
> .
> .
> .
> [5678] ; second node
> rxchannel = Radio/usb1
> ; Configuration settings from rpt.conf.sample tailored to your
> application follow the channel definition above.
> .
> .
> .
> [9012] ; third node
> rxchannel = Radio/usb2
> ; Configuration settings from rpt.conf.sample tailored to your
> application follow the channel definition above.
> .
> .
> .
> 
> 
> Standard disclaimer boilerplate: I tried to answer your question. I
> haven't tested what is documented above. I just did some quick research
> to come up with this answer, and the research was not in-depth, There
> may very well be something I left out, so your mileage may vary. There
> are no guarantees. If you find something and fix it, please post it back
> to the list so everyone will benefit from it.
> 
> 
> Steve
> WA6ZFT
> 
> 
> 
> David McGough wrote:
>> Hi Everyone,
>>
>> I'm finally getting to "finish up" my URI based project and wondered if
>> someone could help point me to some advanced sample asterisk/app_rpt
>> config files (usbradio.conf, rpt.conf, primarily) for using the URI
>> adapters.
>>
>> I've currently got 1 URI working properly with my TKR-850 repeater. Now, I
>> want to add 2 remote base radios for VHF and HF, do some linking, etc. I, 
>> mainly need more info about the syntax to use with multiple URI's, 
>> usbradio.conf options, etc.
>>
>> Thanks in advance!
>>
>> David KB4FXC
>>
>>
>>
>> _______________________________________________
>> App_rpt mailing list
>> App_rpt at lists.illiana.net
>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
> 