[App_rpt] URI configuration help

[Mark Cheavens]

Why can there be no USB Hubs?
I have two systems in development right now that will both require 
hubs to gain enough ports.

The adding one at a time and keeping them in the same location is the 
reason to use the URI's and add eeproms. Has anybody actually 
utilized the eprom functions using a URI and Asterisk?

Mark,
KC5EVE

At 08:50 PM 7/21/2008, you wrote:
>David,
>
>First off, I just learned something myself about adding extra radio
>ports using USB fobs: They must be added one at a time.
>
>Second, there should be no USB hubs between the FOB's and the PC's USB
>ports.
>
>Finally, what type if linux install is this? ACID, EVB, custom?
>
>
>I'd suggest restoring the configuration back to one radio port get that
>working, then add and tune the ports one at a time.
>
>
>Steve,
>WA6ZFT
>
>
>
>
>David McGough wrote:
> >
> > Hi Roger & Steve,
> >
> > Well, I'm making progress. I've noticed a couple more things I thought I'd
> > mention. First, I've got a strange situation where I can only properly
> > access 2 of the 3 URI's I have attached to the PC....Initially, I only
> > plugged 1 URI in and couldn't get it to work at all (though the green LED
> > was blinking)....Then, when I plugged in a 2nd URI, the first started
> > working (with my TKR-850)....Today, I found that the second wasn't
> > functional....So, tonight, experimentally, I plugged in a 3rd URI and
> > both of the original 2 are now working. Strange.....Perhaps this has
> > something to do with udev? Anyway, this isn't holding me up at the moment.
> >
> > The second issue is more troublesome. I can't get the repeater to link to
> > the remote base....When I issue the connect command: *2(node number), the
> > controller says it's linking both on the console and verbally. But, then
> > it seems to hang totally with the TX enabled from the end that received
> > the commands. I've tried this both ways--repeater to remote base (commands
> > from the repeater) and vice versa. I end up having to kill -9 the asterisk
> > process to regain control--"stop now" from the asterisk console
> > hangs...This should work, right?
> >
> > Thanks in advance!
> >
> > David KB4FXC
> >
> >
> > On Sun, 20 Jul 2008, David McGough wrote:
> >
> >> Hi Steve and Roger,
> >>
> >> Thanks so much for the assistance. I'll give it a try today and report
> >> back. I think most of my questions are now answered.
> >>
> >> <snip>
> >>
> >>
> >
> > _______________________________________________
> > App_rpt mailing list
> > App_rpt at lists.illiana.net
> > http://lists.illiana.net/mailman/listinfo/app_rpt
> >
>
>_______________________________________________
>App_rpt mailing list
>App_rpt at lists.illiana.net
>http://lists.illiana.net/mailman/listinfo/app_rpt