[App_rpt] URI configuration help

Tue Jul 22 20:27:05 UTC 2008

No Problemo Mr Jim Dude.  Just get well soon!!!

Roger W4RFJ

  _____  

From: app_rpt-bounces at lists.illiana.net
[mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Jim Duuuude
Sent: Tuesday, July 22, 2008 1:05 PM
To: Asterisk Repeater Controler
Subject: Re: [App_rpt] URI configuration help

sorry I have been MAJORLY sick the past few days. Ill just took care of the
GMRS one, and
the other ones Ill get to once I decide on numbering space assignments.

> From: w4rfj at comcast.net
> To: app_rpt at lists.illiana.net
> Date: Sun, 20 Jul 2008 16:22:54 -0400
> Subject: Re: [App_rpt] URI configuration help
> 
> Thanks Steve,
> 
> Jim Dude, Did you get my applications??
> 
> Best Regards,
> Roger W4RFJ
> 
> -----Original Message-----
> From: app_rpt-bounces at lists.illiana.net
> [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Stephen Rodgers
> Sent: Sunday, July 20, 2008 2:41 AM
> To: Asterisk Repeater Controler
> Subject: Re: [App_rpt] URI configuration help
> 
> Roger,
> 
> Jim WB6NIL does all pttlink registration work, at least for now.
> 
> Steve,
> WA6ZFT
> 
> 
> 
> Roger F. Jordan Sr. wrote:
> > Below are examples of MY SETUP as assisted by W9SH
> > 
> > I removed the Functions but notice the phone functions use two different
> > function lists for Phonepatch... They are not included for security
> > reasons...
> > 
> > I hope this helps!!!
> > 
> > Also Steve, Did you get my apps for The GMRS, FRS and MURS and All the
> > registrations for the different systems I applied for (or is that not
you)
> > 
> > I would also like to talk to You guys about Phone patch control... 
> > 
> > Best Regards to ALL 
> > 
> > Roger W4RFJ
> > 
> > ; rpt.conf
> > ; 20071103 0900 sphenke at xelatec.com
> > 
> > ; Radio Repeater / Remote Base config for use with app_rpt
> > ; manipulated by the app_rpt installation script
> > ; text strings that begin with xxx_ should be manually edited
> > ; if the install script does not replace them.
> > 
> > [101]
> > rxchannel = radio/usb
> > duplex = 2
> > functions = functions ; DTMF function list
> > link_functions = functions-linked ; DTMF function list for link
> > phone_functions = functions-phone-1 ; (optional) different functions for
> > 'P' mode
> > tonezone = us ; use US tones (default)
> > context = from-internal ; dialing context for phone
> > callerid = "de w4rfj/r"<445.95 pl100> ; Callerid for phone calls
> > idrecording=|ide w4rfj/r
> > accountcode=RADIO ; account code (optional)
> > funcchar = * ; function lead-in character
> > (defaults to '*')
> > endchar = # ; command mode end character
> > (defaults to '#')
> > hangtime=10 ; squelch tail hang time (in ms)
> > (optional)
> > totime=180000 ; transmit time-out time (in ms)
> > (optional)
> > idtime=600000 ; id interval time (in ms)
> > (optional)
> > politeid=30000 ; time in milliseconds
> before ID
> > timer
> > propagate_phonedtmf=yes ;propagate_phonedtmf = yes
> > unlinkedct=ct1 ; DTMF sent to system from
> phone
> > gets
> > ; repeated into main system output
> > and
> > 
> > [102]
> > rxchannel = radio/usb1
> > duplex = 0
> > functions = functions ; DTMF function list
> > link_functions = functions-linked ; DTMF function list for link
> > phone_functions = functions-phone-1 ; different functions 
> > tonezone = us ; use US tones (default)
> > context = from-internal ; dialing context for phone
> > callerid = "wqex329"<FRS Channel 1> ; Callerid for phone calls
> > idrecording=|iK
> > accountcode=RADIO ; account code (optional)
> > funcchar = * ; function lead-in character
> > (defaults to '*')
> > endchar = # ; command mode end character
> > (defaults to '#')
> > hangtime=3 ; squelch tail hang time (in ms)
> > (optional)
> > totime=180000 ; transmit time-out time (in ms)
> > (optional)
> > idtime=600000 ; id interval time (in ms)
> > (optional)
> > politeid=30000 ; time in milliseconds
> before ID
> > timer
> > propagate_phonedtmf=no
> > 
> > *************everything in between deals with DTMF Commands Etc...
> > 
> > 101 = radio at 192.168.14.149:4569/101,NONE
> > 102 = radio at 192.168.14.149:4569/102,NONE
> > 
> > ; end of file - rpt.conf
> > 
> > ------------------------------------------------------------------------
> > 
> > ; usbradio.conf
> > ; Configuration for chan_usbradio
> > ; 20071205 0845 sphenke at xelatec.com
> > ; refer to globals_rpt_custom.conf for variable definitions
> > ;
> > [general]
> > 
> > rxcpusaver=0
> > txcpusaver=0
> > 
> > [usb]
> > hwtype=0
> > rxboost=1
> > rxctcssrelax=0
> > txctcssdefault=100.0
> > rxctcssfreqs=100.0
> > txctcssfreqs=100.0
> > carrierfrom=dsp
> > ctcssfrom=dsp
> > rxdemod=flat
> > txprelim=yes
> > txtoctype=notone
> > txmixa=composite
> > txmixb=no
> > invertptt=0
> > ;rxfreq=445.950000
> > ;txfreq=147.490000
> > duplex=1
> > eeprom=0
> > 
> > [usb1]
> > hwtype=0
> > rxboost=1
> > rxctcssrelax=1
> > ;txctcssdefault=0
> > ;rxctcssfreq=0
> > ;txctcssfreq=0
> > carrierfrom=vox
> > ctcssfrom=no
> > rxdemod=speaker
> > txprelim=no
> > txtoctype=no; notone
> > txmixa=voice
> > txmixb=no
> > invertptt=0
> > ;rxfreq=462.562500
> > ;txfreq=462.562500
> > duplex=0
> > eeprom=0
> > 
> > 
> > 
> > 
> > -----Original Message-----
> > From: app_rpt-bounces at lists.illiana.net
> > [mailto:app_rpt-bounces at lists.illiana.net] On Behalf Of Stephen Rodgers
> > Sent: Saturday, July 19, 2008 6:56 PM
> > To: Asterisk Repeater Controler
> > Subject: Re: [App_rpt] URI configuration help
> > 
> > David,
> > 
> > This is one area where our documentation falls short. We have got
> > automated installs and config examples for single-node systems, but
> > no examples for multi-node systems. Basically for each usb mode
> > entries will need to be made in usbradio.conf, rpt.conf, and
> > extensions.conf.
> > 
> > *** usbradio.conf ***
> > 
> > 
> > [general]
> > 
> > ; Nothing in the general section for multiple devices.
> > 
> > [usb] ; first node
> > ; Insert all USB config options from usbradio.conf.sample here except
> > ; for devicenum setting. Modify settings to suit configuration.
> > .
> > .
> > .
> > devicenum=0 ; unique for each device defined
> > .
> > .
> > .
> > [usb1] ; second node
> > .
> > .
> > .
> > devicenum=1
> > .
> > .
> > .
> > 
> > [usb2] ; third node
> > .
> > .
> > .
> > devicenum=2
> > .
> > .
> > .
> > 
> > *** extensions.conf ****
> > 
> > exten => 1234,1,rpt,1234 # first node
> > exten => 5678,1,rpt,5678 # second node
> > exten => 9012,1,rpt,9012 # third node
> > 
> > 
> > **** rpt.conf ****
> > 
> > rpt.conf
> > 
> > [1234] ; first node
> > rxchannel = Radio/usb
> > ; Configuration settings from rpt.conf.sample tailored to your
> > application follow the channel definition above.
> > .
> > .
> > .
> > [5678] ; second node
> > rxchannel = Radio/usb1
> > ; Configuration settings from rpt.conf.sample tailored to your
> > application follow the channel definition above.
> > .
> > .
> > .
> > [9012] ; third node
> > rxchannel = Radio/usb2
> > ; Configuration settings from rpt.conf.sample tailored to your
> > application follow the channel definition above.
> > .
> > .
> > .
> > 
> > 
> > Standard disclaimer boilerplate: I tried to answer your question. I
> > haven't tested what is documented above. I just did some quick research
> > to come up with this answer, and the research was not in-depth, There
> > may very well be something I left out, so your mileage may vary. There
> > are no guarantees. If you find something and fix it, please post it back
> > to the list so everyone will benefit from it.
> > 
> > 
> > Steve
> > WA6ZFT
> > 
> > 
> > 
> > David McGough wrote:
> >> Hi Everyone,
> >>
> >> I'm finally getting to "finish up" my URI based project and wondered if
> >> someone could help point me to some advanced sample asterisk/app_rpt
> >> config files (usbradio.conf, rpt.conf, primarily) for using the URI
> >> adapters.
> >>
> >> I've currently got 1 URI working properly with my TKR-850 repeater.
Now,
> I
> >> want to add 2 remote base radios for VHF and HF, do some linking, etc.
I,
> 
> >> mainly need more info about the syntax to use with multiple URI's, 
> >> usbradio.conf options, etc.
> >>
> >> Thanks in advance!
> >>
> >> David KB4FXC
> >>
> >>
> >>
> >> _______________________________________________
> >> App_rpt mailing list
> >> App_rpt at lists.illiana.net
> >> http://lists.illiana.net/mailman/listinfo/app_rpt
> >>
> > 
> > _______________________________________________
> > App_rpt mailing list
> > App_rpt at lists.illiana.net
> > http://lists.illiana.net/mailman/listinfo/app_rpt
> > 
> > _______________________________________________
> > App_rpt mailing list
> > App_rpt at lists.illiana.net
> > http://lists.illiana.net/mailman/listinfo/app_rpt
> > 
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20080722/32032ca2/attachment.html>