[App_rpt] Dial-in access to remote base

[David McGough]

Hi Steve,

Okay, I reconfigured both remote bases as standard nodes--I just copied
the context used for my repeater node and set duplex=0. This works
properly with VOX mode, manual keying/unkeying, etc., just like with the
repeater node....No issues.

And, okay about the link status--I just thought the segfault was 
interesting.

So, other than loss of frequency agility, can you think of any other 
"show stoppers" that I might hit by retiring remote base mode entirely and 
just using standard mode for everything??

73, David KB4FXC



On Thu, 9 Oct 2008 hwstar at rodgers.sdcoxmail.com wrote:

> See below
> 
> Steve
> WA6ZFT
> 
> > 

<* snip *>

> 
> First off: Link status doesn't make sense on a remote base!
> Remote bases are for exclusive use by one user at a time! 
> 
> Key-unkey flakiness. Two things to check:
> 
> 1. What happens when you configure the HF and VHF radios as a standard node (with duplex=0)? The remote base code is separate from the standard node code, and there could be a keying bug could be in the remote base code. 
> 
> 2. Please confirm the phone key/unkey is not flakey on your standard node.This key/unkey issue could be a SIP configuration issue.
> 
>