[App_rpt] Dial-in access to remote base

[David McGough]

Eric,

Very good idea! 

....I did just find one downside to not using remote base mode. I'm 
now getting LOTS of false DTMF decodes from the HF radio now. ugh.

73, David KB4FXC


On Thu, 9 Oct 2008, Eric Fort wrote:

> on a side note could the frequency agility be done through the dialplan and
> agi?
> 
> Eric
> 
> On Thu, Oct 9, 2008 at 12:57 PM, David McGough <kb4fxc at inttek.net> wrote:
> 
> >
> > Hi Steve,
> >
> > Okay, I reconfigured both remote bases as standard nodes--I just copied
> > the context used for my repeater node and set duplex=0. This works
> > properly with VOX mode, manual keying/unkeying, etc., just like with the
> > repeater node....No issues.
> >
> > And, okay about the link status--I just thought the segfault was
> > interesting.
> >
> > So, other than loss of frequency agility, can you think of any other
> > "show stoppers" that I might hit by retiring remote base mode entirely and
> > just using standard mode for everything??
> >
> > 73, David KB4FXC
> >
> >
> >
> > On Thu, 9 Oct 2008 hwstar at rodgers.sdcoxmail.com wrote:
> >
> > > See below
> > >
> > > Steve
> > > WA6ZFT
> > >
> > > >
> >
> > <* snip *>
> >
> > >
> > > First off: Link status doesn't make sense on a remote base!
> > > Remote bases are for exclusive use by one user at a time!
> > >
> > > Key-unkey flakiness. Two things to check:
> > >
> > > 1. What happens when you configure the HF and VHF radios as a standard
> > node (with duplex=0)? The remote base code is separate from the standard
> > node code, and there could be a keying bug could be in the remote base code.
> > >
> > > 2. Please confirm the phone key/unkey is not flakey on your standard
> > node.This key/unkey issue could be a SIP configuration issue.
> > >
> > >
> >
> > _______________________________________________
> > App_rpt mailing list
> > App_rpt at lists.illiana.net
> > http://lists.illiana.net/mailman/listinfo/app_rpt
> >
>