[App_rpt] New guy with questions

[Stephen Rodgers]

For some reason the domain allstarlink.org is a problem for some ISP's.
(We don't know why this is the case, and we don't have the bandwidth to
actively track it down at this time) You are not the only one who has
not received a reply from allstarlink.org. The best thing to do in this
case is to check to see if your callsign is in the public node list on
allstarlink.org. If it is, then make a note of the node number and then
send an email directly to me if you haven't received your node number
and password in an email message within a few days of registering. I
will then send you your password.

Steve
WA6ZFT




RED BUTTON MOBILE wrote:
> Hi all, I have been monitoring the list for a while and read through 
> some of the the archives.
> 
> I am thinking of taking the plunge into the AppRpt world.
> 
> Q1)   I have a need to have an 8 port repeater controller at one site 
> (local radios) with maybe 1 or 2 off site IAX links possible later.
> Can a single Asterisk box perform as an 8 port controller?
> If so, can it be done with 8 USB fobs?
> I read some were that a system was set up with a USB hub and 7 Fobs.
> 
> Q2)Assuming system above is doable, what hardware would be required?
> I have an IBM P4 3G with 1Gig of memory. I also have 2 USB 2.0 PCI cards 
> to install for USB support.
> Will this system do?
> 
> Q3) I went to the Allstar page to request a node number but have not 
> received a response. for over 2 weeks.
> Did I do something wrong? I filled out all the required info and it said 
> Information uploaded. Does this mean the info was submitted?
> 
> Q4) There seems to be several USB Fobs out there, and some are supported 
> and some look like the right ones but dont have the cm 108 chips.
> Is there a list of known makes and models that are supported for AppRpt?
> If not could  this info be posted some ware so if one finds a source of 
> the fob then the model could be checked before buying?
> 
> Q5) Can AppRpt support other audio interfaces like multiple Sound cards 
> or IRLP interfaces.
> I know it can use the IRLP interface as a radio interface.
> Can it also support M AUDIO multiport audio pci cards?
> 
> Anyway that my first opening questions for my project.
> 
> Thanks for any help.
> 
> Jon
> VA3RQ
> 
> 
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
>