[App_rpt-users] app_rpt as a controller

[Ramesh Dhami (VA3UV)]

Stephen Rodgers wrote:
> The timing of the CTCSS and carrier is configurable in usbradio.conf.
> See the reference for "chicken burst".

<-- Hi Steve; Yes, I have seen that and do have 'txtoctype=notone' the 
problem is the slow response time of the decoders in most amateur 
transceivers - i.e., we still hear a squelch crash on the receiver.  So 
my question is whether the timing between drop of PL and drop of carrier 
is user configurable?

As I write this note (sitting on the train), I wonder whether the value 
of unkeywait in the wait-times stanza in rpt.conf would extend the delay...
> 
> Regarding separation of audio. There is not that much granularity in the
> system. Basically, the voice band information (voice, courtesy tones,
> ID's, etc.) is all lumped together, and the CTCSS subaudible tone can
> only be split off. To do what you are asking for would be a major
> architectural change.
> 
<-- OK don't worry about it :)