[App_rpt-users] Asterisk and Echolink no direct connected radio

[Todd Birkenholtz]

Thanks Jim I will change my rpt.conf to rxchannel = Zap/pseudo

Any Idea on why no audio in my inbound Echolink connections?

My echolink inbound connection looks like this.

In extensions.conf

[radio-secure]
exten => 2345,1,Answer
exten => 2345,n,Playback(tt-weasels,skip)
exten => 2345,n,Hangup

 *CLI> [Aug 14 11:45:36] NOTICE[16779]: chan_echolink.c:2189 do_new_call:
new CALL=W0IOU,ip=204.13.148.184,name=        Todd
    -- Executing [2345 at radio-secure:1] Answer("echolink/el0-12", "") in new
stack
    -- Executing [2345 at radio-secure:2] Playback("echolink/el0-12",
"tt-weasels|skip") in new stack
    -- <echolink/el0-12> Playing 'tt-weasels' (language '')
    -- Executing [2345 at radio-secure:3] Hangup("echolink/el0-12", "") in new
stack
  == Spawn extension (radio-secure, 2345, 3) exited non-zero on
'echolink/el0-12'


Thanks



On Fri, Aug 14, 2009 at 12:58 PM, Steve Zingman <szingman at msgstor.com>wrote:

>  Todd Birkenholtz wrote:
> > Fellow Hams and PBX tinkerer's
> >
> > I want to provide a auto-patch and a repeater dial-in for our club
> > repeater using my existing home Asterisk PBX in a Flash setup.
> > Our club repeater is connected to Echolink so I was thinking about
> > creating a Echolink node on my server that users could link to then I
> > would allow an outbound call.
> > On the reverse I would like to provide a repeater dial-in number that
> > would route through my Asterisk server to our club's node via
> > Echolink. Keeping in mind at no time does my Asterisk server actually
> > communicates with a radio directly it is just acting as a Echolink
> > gateway.
> >
> > I have been experimenting with ACID but it appears the radio/usb
> > driver is preventing Asterisk from loading without a actual usb radio
> > connected. If I noload=chan_usbradio in the modules.conf file then
> > Asterisk appears to load but I am still having problems with refrence
> > to it in my rpt.config file.
> >
> > I have been able to configure a Echolink connection but I
> > cant send audio to the connected node when the remote station connects
> > but the Asterisk debug indicates it is.
> > Does anybody have a working Echolink node that they would like to
> > share their iax,echolink,rpt and extensions config file with me.
> >
> >
> Todd,
> Set rxchannel = Zap/pseudo in place chan_usb in rpt.conf You will not
> need the hardware.
>
>
> 73, Steve N4IRS
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20090814/f2f77e28/attachment.html>