[App_rpt-users] Asterisk and Echolink no direct connected radio

[James Nessen]

If your node is behind a firewall, it sounds like you don't have ports  
5198 and 5199 udp forwarded into your node.   If your node sits out on  
a public IP, make sure your upstream ISP doesn't filter on those ports.

Jim / K6JWN

On Aug 14, 2009, at 11:47 AM, Todd Birkenholtz wrote:

> Thanks Jim I will change my rpt.conf to rxchannel = Zap/pseudo
>
> Any Idea on why no audio in my inbound Echolink connections?
>
> My echolink inbound connection looks like this.
>
> In extensions.conf
>
> [radio-secure]
> exten => 2345,1,Answer
> exten => 2345,n,Playback(tt-weasels,skip)
> exten => 2345,n,Hangup
>
>  *CLI> [Aug 14 11:45:36] NOTICE[16779]: chan_echolink.c:2189  
> do_new_call: new CALL=W0IOU,ip=204.13.148.184,name=        Todd
>     -- Executing [2345 at radio-secure:1] Answer("echolink/el0-12", "")  
> in new stack
>     -- Executing [2345 at radio-secure:2] Playback("echolink/el0-12",  
> "tt-weasels|skip") in new stack
>     -- <echolink/el0-12> Playing 'tt-weasels' (language '')
>     -- Executing [2345 at radio-secure:3] Hangup("echolink/el0-12", "")  
> in new stack
>   == Spawn extension (radio-secure, 2345, 3) exited non-zero on  
> 'echolink/el0-12'
>
>
> Thanks
>
>
>
> On Fri, Aug 14, 2009 at 12:58 PM, Steve Zingman  
> <szingman at msgstor.com> wrote:
> Todd Birkenholtz wrote:
> > Fellow Hams and PBX tinkerer's
> >
> > I want to provide a auto-patch and a repeater dial-in for our club
> > repeater using my existing home Asterisk PBX in a Flash setup.
> > Our club repeater is connected to Echolink so I was thinking about
> > creating a Echolink node on my server that users could link to  
> then I
> > would allow an outbound call.
> > On the reverse I would like to provide a repeater dial-in number  
> that
> > would route through my Asterisk server to our club's node via
> > Echolink. Keeping in mind at no time does my Asterisk server  
> actually
> > communicates with a radio directly it is just acting as a Echolink
> > gateway.
> >
> > I have been experimenting with ACID but it appears the radio/usb
> > driver is preventing Asterisk from loading without a actual usb  
> radio
> > connected. If I noload=chan_usbradio in the modules.conf file then
> > Asterisk appears to load but I am still having problems with  
> refrence
> > to it in my rpt.config file.
> >
> > I have been able to configure a Echolink connection but I
> > cant send audio to the connected node when the remote station  
> connects
> > but the Asterisk debug indicates it is.
> > Does anybody have a working Echolink node that they would like to
> > share their iax,echolink,rpt and extensions config file with me.
> >
> >
> Todd,
> Set rxchannel = Zap/pseudo in place chan_usb in rpt.conf You will not
> need the hardware.
>
>
> 73, Steve N4IRS
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users