[App_rpt-users] No Carrier Squelch Mode

[Stephen Rodgers]

Tim Sawyer wrote:
> I am attempting to get carrier squelch mode to work. The relevant  
> parts of my usbradio.conf are shown below. Even with this  
> configuration the repeater is always in P/L decode mode. I know for  
> sure there is not a P/L decoder in the repeater. Any ideas?
> 
> 
> txctcssdefault=100.0    ; default tx ctcss freq, any frequency permitted
> rxctcssfreqs=100.0      ; rx ctcss freqs in floating point. must be in  
> table
> txctcssfreqs=100.0      ; tx ctcss freqs, any frequency permitted
> carrierfrom=usb         ; no,usb,usbinvert,dsp,vox
> ctcssfrom=no            ; no,usb,dsp
> rxdemod=speaker            ; input type from radio: no,speaker,flat
> 
> --
> Tim, WD6AWP
> :wq
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
> 

Yes, there's an annoying issue with CTCSS which needs to be fixed.

Comment out the rxctcssfreqs and txctcssfreqs entries and it should
start working.

This issue logged in Mantis.

Steve
WA6ZFT