[App_rpt-users] No Carrier Squelch Mode

[Tim Sawyer]

I am attempting to get carrier squelch mode to work. The relevant  
parts of my usbradio.conf are shown below. Even with this  
configuration the repeater is always in P/L decode mode. I know for  
sure there is not a P/L decoder in the repeater. Any ideas?


txctcssdefault=100.0    ; default tx ctcss freq, any frequency permitted
rxctcssfreqs=100.0      ; rx ctcss freqs in floating point. must be in  
table
txctcssfreqs=100.0      ; tx ctcss freqs, any frequency permitted
carrierfrom=usb         ; no,usb,usbinvert,dsp,vox
ctcssfrom=no            ; no,usb,dsp
rxdemod=speaker            ; input type from radio: no,speaker,flat

--
Tim, WD6AWP
:wq