[App_rpt-users] EchoLink Levels

[Tim Sawyer]

I'm changing these values but they don't seem to change the audio  
levels. I put these two lines in my rpt.conf under the node stanza and  
restart Asterisk. Any ideas what I might be doing wrong.

--
Tim
:wq

On Aug 20, 2009, at 12:07 PM, Tim Sawyer wrote:

Sorry for the post.... I just found this on the web site:

. . .
erxgain=-3.0 ; defaults to -3.0 db
etxgain=3.0 ; defaults to 3.0 db
. . . .

--
Tim
:wq

On Aug 20, 2009, at 7:37 AM, Tim Sawyer wrote:

I used the audio adjust howto to set my levels and the repeater sounds
reasonable. But Echolink RX audio is very low and Echolink users say
my TX audio is high. I'm using chan_echolink. Is there a way to adjust
the Echolink levels?

--
Tim, WD6AWP
:wq

_______________________________________________
App_rpt-users mailing list
App_rpt-users at qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users