[App_rpt-users] Connection to speaker output

[Bill Scholey]

I can't see the forest for the trees....  or similar!!!

I'm new to app_rpt and in the process of installing (learning) the 
hardware and software..starting with something simple I thought..  This 
is for remote base not a repeater.

I have the DMK URI and the XIPAR distro installed. When using IAXRPT I 
don't hear any receive audio.. transmit is fine both through the client 
and CLI..  For example *80 I can hear the cw id both on the client and 
over the air.  I am using the speaker conx on an IC28H wired to Mic-in 
(Pin 9) on the URI. I believe the wiring is ok because I move the URI to 
a Windows system and using MMVARI I can see waterfall activity when 
listening on the APRS freq.  I don't have test equipment unfortunately. 
  Using my best 1000Hz whistle on a handheld  I got rxvoice to 
"success"??. I've tweaked various settings in usbradio.conf (ie 
rxdemod=speaker) but still no joy.

Now it's probably something obvious but what???  Like I say it's hidden 
in the forest somewhere..  So any clues for the clueless would be 
appreciated.

Bill ve7qc