[App_rpt-users] Connection to speaker output

[Bill Scholey]

OK Steve..

I am sure I tried commenting out the CTCSS stuff previously but I am not 
sure that I restarted Asterisk properly afterwards.. I guess not because 
I get audio now...  I believe the XIPAR Asterisk restart is different 
than ACID and that's what I might have done wrong. I will need to look 
into that a bit further.

Thanks also for the clarification on Remote vs Simplex.

73
Bill ve7qc

Stephen Rodgers wrote:
> Bill Scholey wrote:
>> I can't see the forest for the trees....  or similar!!!
>>
>> I'm new to app_rpt and in the process of installing (learning) the 
>> hardware and software..starting with something simple I thought..  This 
>> is for remote base not a repeater.
>>
>> I have the DMK URI and the XIPAR distro installed. When using IAXRPT I 
>> don't hear any receive audio.. transmit is fine both through the client 
>> and CLI..  For example *80 I can hear the cw id both on the client and 
>> over the air.  I am using the speaker conx on an IC28H wired to Mic-in 
>> (Pin 9) on the URI. I believe the wiring is ok because I move the URI to 
>> a Windows system and using MMVARI I can see waterfall activity when 
>> listening on the APRS freq.  I don't have test equipment unfortunately. 
>>   Using my best 1000Hz whistle on a handheld  I got rxvoice to 
>> "success"??. I've tweaked various settings in usbradio.conf (ie 
>> rxdemod=speaker) but still no joy.
>>
>> Now it's probably something obvious but what???  Like I say it's hidden 
>> in the forest somewhere..  So any clues for the clueless would be 
>> appreciated.
>>
>> Bill ve7qc
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
> 
> The following may or may not apply for a xipar distro. This
> list primarily fields ACID and Limey Linux questions. It wouldn't hurt
> to ask the same question over there.
> 
> --
> For Acid and Limey, this is usually caused by not changing the default
> configuration from CTCSS to carrier squelch.
> 
> You probably have txtone and txtone uncommented in usbradio.conf.
> Comment them out like this:
> 
> ;rxctcssfreqs=100.0	
> ;txctcssfreqs=100.0	
> 
> Also make sure that ctcssfrom=no
> 
> Restart asterisk when these changes are made to usbradio.conf
> You might want to check the xipar website for details about how to do this.
> 
> Second, what you want is probably not a remote base, but a simplex node.
> Remote bases are remotely tunable, simplex nodes are always on the same
> frequency.
> 
> Steve
> WA6ZFT
> 
> 
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.375 / Virus Database: 270.12.93/2206 - Release Date: 06/27/09 17:55:00
> 

-- 
Bill Scholey
Home: (604) 922-1662
Fax:  (604) 926-1603
Cell: (604) 723-7790

WARNING - CONFIDENTIALITY NOTICE This e-mail and any attachments may 
contain confidential and privileged information. Any use, disclosure, 
copying or dissemination of this information by a person other than an 
intended recipient is not authorized and may be illegal. If you are not 
an intended recipient, please notify the sender immediately by return 
e-mail, delete this e-mail and destroy any copies. Thank you.