[App_rpt-users] Fwd: Re: ACID install issue anyone seen this before? anyone know the centos default root password?

[Stephen Rodgers]

Steve Gladden wrote:
> On Fri, 20 Nov 2009, hwstar at rodgers.sdcoxmail.com wrote:
> 
>>
>>>
>>> From: David McGough <kb4fxc at inttek.net>
>>> Date: 2009/11/20 Fri PM 12:33:29 PST
>>> To: Steve Gladden <steve at michiganbroadband.com>
>>> CC: sales at qrvc.com,  app_rpt mailing list <app_rpt-users at qrvc.com>
>>> Subject: Re: [App_rpt-users] Fwd: Re: ACID install issue anyone seen
>>> this
>>>  before? anyone know the centos default root password?
>>>
>>>
>>> On Fri, 20 Nov 2009, Steve Gladden wrote:
>>> <snip>
>>>> Just as per request and for comparing notes..
>>>> Digging in deeper reveals the no sources error
>>>> manually launching phase2 gies a little more detail:
>>>>
>>>>
>>>> make[3]: Leaving directory `/usr/src/zaptel/menuselect/mxml'
>>>> gcc -o menuselect menuselect.o strcompat.o menuselect_curses.o
>>>> mxml/libmxml.a mxml/libmxml.a -lncurses
>>>> make[2]: Leaving directory `/usr/src/zaptel/menuselect'
>>>> make[1]: Leaving directory `/usr/src/zaptel/menuselect'
>>>> Generating input for menuselect ...
>>>> make[1]: Entering directory `/usr/src/zaptel'
>>>> echo "You do not appear to have the sources for the
>>>> 2.6.18-164.6.1.el5PAE kernel installed."
>>>> You do not appear to have the sources for the 2.6.18-164.6.1.el5PAE
>>>> kernel installed.
>>>> exit 1
>>>> make[1]: *** [modules] Error 1
>>>> make[1]: Leaving directory `/usr/src/zaptel'
>>>> make: *** [all] Error 2
>>>> Failure: Unable to compile Zaptel 2
>>>> Fatal error: Unable to install Asterisk!
>>>> [root at test rc.d]#
>>>>
>>>>
>>>>
>>>
>>>
>>> Hi Steve,
>>>
>>> Yes, I had the same problem that the kernel source code wasn't installed
>>> when I did an ACID install a few months ago. But, this is easy to fix.
>>> From a root prompt, just install the package using yum....A command
>>> like:
>>>
>>>         yum install kernel-PAE-devel.i686
>>>
>>> Also, I'll upload my "cooked" 2.6.30.5 kernel tonight and send you a
>>> link.
>>> It should be easy enough to install...
>>>
>>> BTW, I seem to remember needing some other packages, too....But, I don't
>>> recall which at the moment.
>>>
>>>
>>>
>>> 73, David kb4fxc
>>>
>>>
>>>
>>>
>>
>> I'm still at work, so I have to make this brief.
>>
>> It would be nice to know if a 'yum install kernel-PAE-devel'
>> allows phase2.sh to run to completion successfully.
>>
>>
>> Steve
>> WA6ZFT
>>
>>
>>
>>
> 
> Steve.. it certainly does work (manually using yum to grab the changed
> source).
> 
> Brought it up on the Quad core Intel system New (NVidia Motherboard).
> 
> It's working... and just like you said.. still audio dropouts here & there.
> All of the 4 cores is at less than 1% utilization.
> I'm pretty sure asterisk only uses one core.
> 
> :-)
> 
> 
> 
> 
> 
> 
I made a change to the phase1.sh script to do the 'uname -r | grep PAE' and the install runs to completion on a non-PAE
system. This script change has been uploaded to dl.allstarlink.org/installcd. Try re-installing from scratch on a PAE
system and tell me if it works or not.

Steve
WA6ZFT