[App_rpt-users] playback command

[Steve Gladden]

Matt wrote:
> Yep got this all working as intended now.
>
> Thanks guys for all your help.
>
> Kind regards
>
> Matt
>
>
>
> Sent from my BlackBerry® wireless device
>
> ------------------------------------------------------------------------
> *From: * Matt Beasant <matt.g4rky at googlemail.com>
> *Date: *Mon, 23 Nov 2009 18:38:00 +0000
> *To: *<sales at qrvc.com>
> *Cc: *<Ramesh at va3uv.com>; app_rpt<App_rpt-users at qrvc.com>
> *Subject: *Re: [App_rpt-users] playback command
>
> Ah, thank you both for the replies.
>
> I have this working now Stephen, thanks for that.
>
> Now I have another related ( loosely ) question. 
>
> I wanted to use this function to play a voice ID at the top of the 
> hour on a repeater. 
>
> I have just ( yesterday ) added an additonal node to my system at 
> Dundry and now have two nodes running on 1 machine. 
>
> The instructions to achieve this were great and its easy to do, but 
> there was one part I wasnt 100% sure about.
>
> In RPT.CONF, where do I put my configuration for the second node?
>
> Do I put it right at the very end of the existing config, after the 
> scheduler section or do I put it after the node definition, after the 
> statpost commands?
>
> I'll give it a try at the very end and see what happens....
>
> Thanks,
>
> Matt
>
> 2009/11/23 Stephen Rodgers <sales at qrvc.com <mailto:sales at qrvc.com>>
>
>     Ramesh Dhami (VA3UV) wrote:
>     > Matt Beasant wrote:
>     >> Hi all,
>     >>
>     >> I have been going nuts trying to remember the syntax for this
>     and I am
>     >> hoping someone here can put me straight!
>     >>
>     >> 96=playback 2514 ,hello-world
>     >>
>     > <-- Hi Matt; try this...
>     >
>     > 96=playback 2514,rpt/hello-world
>     >
>     >
>     > Note that 'playback' will play the file globally, so all nodes
>     connected
>     > to 2514 will hear the announcement (use with caution!).
>     >
>     > In the above example, the 'hello-world' file is located in the
>     following
>     > dir:
>     >
>     > /var/lib/asterisk/sounds/rpt
>     >
>     >
>     > HTH - and I look forward to the news about the 220 gear!
>     >
>     > Ramesh.
>     >_______________________________________________
>     > App_rpt-users mailing list
>     > App_rpt-users at qrvc.com <mailto:App_rpt-users at qrvc.com>
>     > http://qrvc.com/mailman/listinfo/app_rpt-users
>     >
>
>     This is how it's used:
>
>     ; Playback messages
>     931000=playback,rpt/sitenorm            ; site normal message
>     931001=playback,rpt/alllinksdisconnected; all links disconnected
>     931002=playback,rpt/alllinksrestored    ; all links restored
>
>     Please not that playback is semi-broken in that it only plays back
>     locally.
>     This is logged in mantis.
>
>     Steve
>     WA6ZFT
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at qrvc.com <mailto:App_rpt-users at qrvc.com>
>     http://qrvc.com/mailman/listinfo/app_rpt-users
>
>
>
> -- 
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
> ------------------------------------------------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>   
If you've not done this already be sure to try:

rpt playback <node#> tt-weasels

Trust me.. it's worthwhile.

If that's not your fancy there's always tt-monkeys

:-)

Steve


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.