[App_rpt-users] Quad PCI Radio setup

[Iñaki Civico]

Hi all,
i'm installing a system with Quad Radio card, but i can't find any 
documentation about zaptel.conf and zapata.conf files for this card.
All seems to start ok but when i call rpt(${NODE}) i get this message: 
"rpt:Sorry unable to obtain Rx channel"

In rpt.conf, rxchannel is Zap/1 and txchannel is Zap/2.

I've followed zaptel.conf comments and configured channels=1-4

# cat /proc/zaptel/2 shows this:
Span 2: PCIRADIO/0 "Board 1"

       1 PCIRADIO/0/0
       2 PCIRADIO/0/1
       3 PCIRADIO/0/2
       4 PCIRADIO/0/3

(Span 1 is ZTDUMMY)


I don't know if channels in zapata.conf must be configured with any 
signalling type as with other cards like tdm400 or so.

Can anybody help me or send any working example?

Thanks in advance,
/Iñaki Civico