[App_rpt-users] Fwd: Experimental IRLP Reflectors

[Tim Sawyer]

Well, I scratched my own itch. The attached archive contains 3 files  
to support experimental IRLP nodes. Put these in your /home/irlp/ 
scripts directory.    The decode script will overwrite the existing  
file... back up first. The other two flies (experimental_call and exp- 
x-reference) are new to app_rpt IRLP.



Enjoy,
Tim, WD6AWP
<esc>:wq

Begin forwarded message:

From: Tim Sawyer <tim.sawyer at mac.com>
Date: September 6, 2009 2:10:20 PM PDT
To: app_rpt <App_rpt-users at qrvc.com>
Cc: Matt Beasant <g4rky at yahoo.co.uk>
Subject: Re: [App_rpt-users] Experimental IRLP Reflectors

I did a bit of looking into this and it turns out the ./scripts/decode  
file doesn't have the bit for experimental nodes. That is..

   if [ $CMD -ge 0000 ] && \
       [ $CMD -lt 1000 ] ; then          # 0000-0999 = Experiment Block
       $SCRIPT/experimental_call exp"$CMD"

Upon further investigation I've discovered the app_rpt version of IRLP  
is not updating the same as a regular IRLP node. App_rpt rsync is  
syncing a directory called update-files and then never moves decode  
(among other files) to the scripts directory.

Anyone know if this was intentional or an oversight? Is it ok to copy  
the updated scripts to the scripts directory?

Thanks,
--
Tim, WD6AWP
<esc>:wq

On Aug 20, 2009, at 3:07 PM, Matt Beasant wrote:

Yes I did that but no luck....

I guess I need to do something else - I have downloaded the  
experiemntal node IP address list also but that didnt help.....

Thanks Tim,

Matt

2009/8/20 Tim Sawyer <tim.sawyer at mac.com>
I've not tried this on Asterisk but it might work the same way it does
on a real IRLP node. That is put

export ALLOW_EXPERIMENTAL_NODES=YES

in your custom/environment file.

--
Tim
:wq

On Aug 20, 2009, at 2:51 PM, Matt Beasant wrote:

Hi all,

How do I get my ACID asterisk node, which is running chan_irlp quite
successfully, to be able to call the IRLP experimental reflectors?

I see from the IRLP yahoo group that there are some different scripts
used to set up calls to these experimental reflectors  - can / is this
incorporated into the chan_irlp driver?

Thanks for any info / advice,

Kind regards,

Matt
G4RKY
_______________________________________________
App_rpt-users mailing list
App_rpt-users at qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users

_______________________________________________
App_rpt-users mailing list
App_rpt-users at qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users


_______________________________________________
App_rpt-users mailing list
App_rpt-users at qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20090907/c4f6c32b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: experimentalcall.tgz
Type: application/octet-stream
Size: 4970 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20090907/c4f6c32b/attachment.obj>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20090907/c4f6c32b/attachment-0001.html>