[App_rpt-users] Announce: ACID version 0.9 released

[Matt Beasant]

I just used the astupd.sh script to update my node 2250.
All worked OK but had to reboot the node after the update.

All seems fine now :-)  app_rpt version 0.203

Matt
G4RKY

2009/9/20 Bob Brown - WØNQX <bbrown at byrg.net>

> BTW i just updated node 2181 using the update script
>
> i went from 0.174 to 0.203
>
> remotely via ssh, seamed to go fine i guess time will tell.
>
> seems i am always behind. hihi!
>
> the new rebuilt 2180 node was a raw install from the
> latest DL iso.
> --
> Thanks in Advance
>
>   Bob Brown, WØNQX
>
>   Kansas City Metro Area
>
>   http://sm0kenet.net
>
>   http://byrg.net
>
>   http://kcdstar.byrg.net
>
> "Surely you can't be serious?" "Of course I am, and don't call me Shirley."
>
> Jonathan Swift<http://www.brainyquote.com/quotes/authors/j/jonathan_swift.html> - "May you live every day of your life."
>
> On Thu, Sep 17, 2009 at 00:00, Stephen Rodgers <
> hwstar at rodgers.sdcoxmail.com> wrote:
>
>>
>> ACID 0.9 can be downloaded from dl.allstarlink.org.
>>
>> This is based on Centos 5.3,
>>
>> ACID version 0.9 contains:
>>
>> app_rpt.c version 0.203:
>>
>> 1. Added tone burst detection for our European friends.
>> 2. Fixed W9SH's audio format mismatch on startup bug (very unusual config)
>> 3. Added check for RPT_A version of zaptel.(We need this to fix
>> autopatch call progress issues)
>> 4. Fixed strange keying problem with new version of IAXRPT.
>> 5. Fixed more hang problems and unreliability with simplex
>> repeater/remote base nodes
>> 6. Fixed telemetry propagation when downrev (non-newkey1) systems present
>> 7. Fixed irlp/echolink tx audio distortion at high gains
>> 8. Resolve spurious time out message.
>> 9. Fixed problems with simplex autopatch.
>> 10. Fixed serial rx hang problem with Kenwood remotes
>> 11. Fixed problem with serial baud rate being wiped out on Kenwood
>> TMG-707 radios (using USB device).
>> 12. Added delay statements to FT-897 serial commands on remote base
>> bacause some FT897 radios do not accept the complete sequence of
>> commands without some delay between the commands.
>> 13. Fixed Mantis bug 0000032: ID Talkover CW loops causes RX audio to chop
>> 14. Add beaconing node stanza key to allow the repeater ID to be sent
>> regardless of whether there has vin activity or not.
>> 15. Fix "always enabled" bug with holdofftelem feature.
>> 16. Add nounkeyct and holdofftelem node stanza confiiguration options.
>> 17. Add COP functions 49 (NOICE) and 50 (NOICD) to enable and disable
>> all Allstar, Echolink and IRLP connections.
>> 18. Fixed telemetry control parameters.
>> 19. Resolve mantis bug 0000016: Quick unkeys and rekeys over the network
>> queue a link Courtesy Tone
>> 20.Add nolocallinkct key to node stanza so that nodes co-hosted on the
>> same server can optionally send no link courtesy tone.
>> 21. Added arbitary tone generation as COP function 48.
>> 22.Add link activity timer function to resolve Mantis feature request
>> 0000010.
>> 23. Better control of IRLP connect and disconnect messages through
>> config file options and DTMF commands, and added irlpplay CLI command to
>> assist in queuing the messages one at a time.
>> 24. Fixed Mantis bug 0000011 pad test broken
>> 25. Fixed Mantis bug 0000004 out-of-band telemetry sent when link in
>> monitor
>> 26.Added antenna select for FT-950
>> 27. Cleaned up debug messages for FT-950
>> 28, Added FT-950 support
>> 29. Fix alarm setup with multiple uChameleons
>>
>> chan_irlp.c version 0.27:
>>
>> 1, Fixed problem with enabling and disabling irlp connect/disconnect
>> announcement mmessages. Use irlpplay Asterisk cli command.
>> 2, Don't update DB when operating in experimental reflector mode.
>> 3. Resolve Mantis bug 0000001 by disabling Asterisk's DTMF decoder on
>> IRLP incoming audio.
>> 4. Major changes to add experimental reflector support and ability to
>> connect to expermental reflectors.
>>
>>
>> chan_echolink.c version 0.21:
>>
>> 1, Resolved Mantis Bugs 0000026 and 0000038
>> 2, Failure to connect to certain Echolink nodes.
>> 3, Removed multiple initial packets.
>>
>> chan_usbradio.c/xpmr has been updated:
>>
>> 1, CM108AH (new uri) support
>> 2, Add support for CM119 sound chips
>> 3, Improve carrier squelch operation.
>> 4. Allow for hot plug functionallity of USB devices
>> 5. Add rxontime parameter for simplex nodes. (anti-pingpong)
>> 6. Fix TX hang problem.
>> 7. Resolve Segfault when txmixa=voice and txtone is set to zero.
>> 8. Sync with Xelatec version. Add TX blanking time.
>> 9. Fixed mode steering problem and clipping in xpmr
>>
>>
>>
>> Final Note: Someone needs to test the astupd feature on older ACID
>> installs and either say it works or doesn't work. Do not use astupd on
>> older installs until we have confirmation that it is working, play it
>> safe and do a complete install from CD unless this is reported to be
>> working from several sources.
>>
>> Steve
>> WA6ZFT
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20090920/95f52517/attachment.html>