[App_rpt-users] CW ID issues

[Stephen Rodgers]

David McGough wrote:
> Hi Everyone,
> 
> I just noticed an oddity related to the ID timer. I have a new simplex 10m
> FM node setup in rpt.conf as a "standard node" (not as a "remote base")
> with duplex=0. In the usbradio.conf file, duplex=0 is set for this node as
> well....This node won't ID unless its TX is already keyed when it is time
> to ID. But, the asterisk screen indicates that it IS IDing properly--it
> shows: "Playing 'xxxxx' (language 'en').......It just doesn't key the 10m 
> TX.
> 
> Note that this node is fully functional, otherwise. And, I'm using 
> app_rpt.c version 0.201 from svn. Oh, and I'm using an idrecording ulaw 
> audio file config'ed for the node in rpt.conf. Any ideas?
> 
> 
> 
> 73, David kb4fxc
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
> 

Does its behaviour change when you use duplex=1? duplex=0 turns off ALL
telemetry including voice ID;s.

Also curious why you want to use duplex=0 and not duplex=1.


Steve
WA6ZFT