[App_rpt-users] dtmf decode during phone patch up not working

KB3ORS - Brian kb3ors at windstream.net
Tue Dec 28 02:40:07 UTC 2010


?In rpt.conf default is # to terminate autopatch.
If you dial the 0 while calling someone you will hang up the call.
# is the default terminator for autopatch and remote command.
Double check the setting in rpt.conf

KB3ORS
Brian
27321

-----Original Message----- 
From: George Csahanin 
Sent: Monday, December 27, 2010 8:26 PM 
To: KB3ORS - Brian ; app_rpt-users at ohnosec.org 
Subject: Re: [App_rpt-users] dtmf decode during phone patch up not working 

Sorry, I thought it was standard.

Should dump the patch

>From rpt.conf:

6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000  ; Autopatch up
0=autopatchdn

GeorgeC


----- Original Message ----- 
From: "KB3ORS - Brian" <kb3ors at windstream.net>
To: "George Csahanin" <george at dyb.com>; <app_rpt-users at ohnosec.org>
Sent: Monday, December 27, 2010 6:58 PM
Subject: Re: [App_rpt-users] dtmf decode during phone patch up not working


> ?What is your *0 command supposed to do.
>
> KB3ORS
> Brian
> 27321
>
> -----Original Message----- 
> From: George Csahanin
> Sent: Monday, December 27, 2010 12:01 PM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] dtmf decode during phone patch up not working
>
> I have another one...
>
> Do *6, get dialtone. Will not decode *0 from radio. CLI of *0 does work, 
> and
> when patch down and looking at console can see *0 decoded, just not while
> patch is active.
>
> Any thoughts, anyone?
>
> Thanks
>
> GeorgeC
> Node 2360
> George J Csahanin
> W2DB
> Cedar Park, TX
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1170 / Virus Database: 1435/3342 - Release Date: 12/27/10 




-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1170 / Virus Database: 1435/3342 - Release Date: 12/27/10



More information about the App_rpt-users mailing list