[App_rpt-users] permalink question

[Corey Dean N3FE]

I oculd be wrong but I thought you had to create the macro first and then point the startup_macro to the correct macro.

From: app_rpt-users-bounces at qrvc.com [mailto:app_rpt-users-bounces at qrvc.com] On Behalf Of Chuck Henderson
Sent: Wednesday, November 03, 2010 6:40 AM
To: app_rpt-users at qrvc.com
Subject: [App_rpt-users] permalink question

I am trying to have a permanent link between my 2 nodes.  I put the following in rpt.conf

[27360]
startup_macro=*327383

While it does bring up the link when the system starts, if there are any errors or if anything disrupts the connection then 27360 just says "disconnected" and never tries to re-establish the permanent link.

Is there another configuration command that I need so that this will re-connect after a disconnect? (such as when the 27383 system reboots)

Chuck









--
This message was scanned and is believed to be clean.
Click here to report this message as spam.<%0d%0ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=8492F2F966.AEAFB%0d%0a>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101103/fc19429b/attachment.html>