[App_rpt-users] permalink question

[Chuck Henderson]

It works!!!  And I think I am starting to understand the configuration a
little now.
Thank you
Chuck

On Wed, Nov 3, 2010 at 10:07 AM, David KE6UPI <dshaw at ke6upi.com> wrote:

> It should be:
> startup_macro=*95327383
>
> rpt.conf
> 951=ilink,11                            ; Specific Link permanent connect -
>  monitor only
> 952=ilink,12                            ; Specific Link permanent connect -
>  monitor only
> *953=ilink,13                            ; Specific Link permanent connect
> - transceive*
> 954=ilink,6                             ; Disconnect all links including
> permalinks
>
> David
>
> On Wed, Nov 3, 2010 at 3:40 AM, Chuck Henderson <
> rpt2 at chuck.midlandsnetworking.com> wrote:
>
>> I am trying to have a permanent link between my 2 nodes.  I put the
>> following in rpt.conf
>>
>> [27360]
>> startup_macro=*327383
>>
>
>> While it does bring up the link when the system starts, if there are any
>> errors or if anything disrupts the connection then 27360 just says
>> "disconnected" and never tries to re-establish the permanent link.
>>
>> Is there another configuration command that I need so that this will
>> re-connect after a disconnect? (such as when the 27383 system reboots)
>>
>> Chuck
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101103/45ca003f/attachment.html>