[App_rpt-users] ACID app_rpt how to recover from crash?

[Stephen Rodgers]

On 11/08/2010 06:24 AM, Chuck Henderson wrote:
> I am running a system built from the ACID CD.  I had it customized and
> working good and then tried to add another node to the same system.
> When asterisk tried to restart, the operating system crashed and
> became unreachable from the network or from the console.  I then
> rebooted the system and it will not boot up.
> 
> It seems that the file system is damaged.
> 
> I know that I could just rebuilld from the CD and then attempt to
> remember what I did to get the system working the way I had it but if
> it is possible to do a recovery procedure I would prefer that.
> 
> Is there a procedure to repair the file system and recover my
> customized configuration files from the system?
> 
> Here is a screen shot of the console after attempting to reboot
> 
> http://www.midlandsnetworking.com/wb9uus-crash.jpg
> 
> Chuck
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
> 

There is no recovery procedure, although it is a good idea to back up the /etc/asterisk directory
often if you are not having the portal download the configuration (i.e. register-only mode).

This error has nothing to do with ACID itself. Your hard disk is getting an I/O error and that
is probably because of a bad sector on the disk.

You should replace the hard disk and install from scratch.


Steve
WA6ZFT