[App_rpt-users] TheLinkBox connectivity

[Jim Nessen]

Jim,

I have setup my node close to what you posted on the website, but I am having an issue...

First of all, here is my config:

tlb.conf
[tlb0]
call=K6JWN-R           ; Call of the app_rpt station
port=44966              ; Start of UDP port range (this port, port + 1)
astnode=2142            ; app_rpt node associated with this instance (for incoming connections)
context=radio-secure    ; Asterisk context for incoming connections
codec=ULAW              ; Default CODEC to be used

rpt.conf
[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your locak nodes, and private (off of allstar link) nodes here.

2142 = radio at 127.0.0.1/2142,NONE        ; This must be changed to your node number
1001 = K6JWN-R,192.168.5.3,44966

When I attempt to connect from my tlb node using:

tlb> .connect -r -p 44966 -u 192.168.5.2
Connecting to "192.168.5.2".

I am seeing this on the asterisk side of things:

[Nov 22 16:15:21] ERROR[11233] chan_tlb.c: Cannot find node entry for K6JWN-R IP addr 192.168.5.3 port 44966

any ideas as to what I missed?

Jim, K6JWN

On Nov 20, 2010, at 3:08 PM, Jim Duuuude wrote:

> App_rpt is now able to interface directly with TheLinkBox.
> 
> See:
> 
> http://app-rpt.qrvc.com/node/178
> 
> 
> JIM WB6NIL
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101122/fe314354/attachment.html>